Vortex Adapter for Microcentrifuge Tubes, 8×1.5 mL Tubes (CAT#: STEM-L-2031-LC)

Cat Number: STEM-L-2031-LC

Application: For mixing

Model: V0631

Description Specification Features Related Products

Description

The Vortex Adapter for Microcentrifuge Tubes is designed for use with any vortex mixer for rapid and complete mixing of many samples at once. The adapter can accommodate 1.5 mL tubes in a disk mounted on a shaft. A sliding plate presses the tube caps when in use.

Specification

Capacity: 8×1.5 mL tubes

Related Products

Vortex Adapter for Microcentrifuge Tubes, 20×1.5 mL Tubes (CAT#: STEM-L-2032-LC)

Other recommended products

Scienceware® Safe-Lab™ Vacuum Adapter, Joint: ST/NS 14/20, Z268836, Bel-Art (CAT#: STEM-L-2981-Y)
Synthware^TM 90 Degree Vacuum Adapter With Glass Stopcock, Male Joint: ST/NS 24/40, Kemtech America Inc. (CAT#: STEM-L-1620-LC)
Julabo^® Adaptors, m16 × 1 Female to npt 1/2 inch Female, Julabo USA, Inc. (CAT#: STEM-L-8331-LC)
Flushing Adapters With Outer Joint, Joint Size 14/20, PTFE Stopcock, STE-Mart (CAT#: STEM-A-0050-LC)
Hirschmann^™ Dispenser Thread Adapters, A 45 to A 38, ETFE (CAT#: STEM-L-8338-LC)
Synthware^TM #15 O-Ring Joint to Hose Connection Adapter, Hose Connection O.D. 10 mm, Kemtech America Inc. (CAT#: STEM-L-2036-LC)
Inner Joint Adapters With PTFE Stopcock, Joint Size 29/42, STE-Mart (CAT#: STEM-A-0069-LC)
Synthware^TM Reducing Adapter, Top Joint: ST/NS 24/40, Bottom Joint: ST/NS 29/42, Kemtech America Inc. (CAT#: STEM-L-1692-LC)