WIGGENS WCI-180R CO2 Roller Bottle Incubator, +5-60°C, Shinetek Instruments Research Institute (CAT#: STEM-CC-3479-LGZ)
Highlights
Small volume CO2 shaking incubator. The 180L CO2 incubator can be built with a roller bottle machine or a shaker. Low-noise oscillation using DC brushless motor.
1. With built-in bottle roller or magnetic drive oscillator The CO2 incubator provided by WIGGENS has a roller bottle machine or a shaker at the bottom of the inner cavity, and adherent cells or suspension cells can be cultured in an incubator at the same time. Operation and control are on the external control panel. 2. Direct heating system on 6 sides The entire side can be directly heated, ensuring a stable and uniform temperature, as well as rapid heating and temperature recovery. The heating chamber is divided into three sections, each monitored by individually calibrated temperature sensors. 3. Air barrier The heating wire is blocked between the cavity and the insulation layer, which helps to recover the temperature quickly and effectively reduces heat loss. Insulation requires no regular maintenance. 4. Double beam CO2 infrared sensor Fast and clear detection of CO2 content, not affected by temperature and humidity changes 5. Naturally humidify with a water tray The heater plays a humidification function after heating the water pan at the bottom. The entire chamber is humidified by a circulating fan. 6. No condensation The door is equipped with a heating unit, and the frame design of the entire incubator ensures that no condensation will form on the box and the glass observation window. 7. Microcomputer PID control Automatic control of CO2 concentration, temperature and alarms. Optional automatic sterilization function is available. 8. CO2 incubator with built-in roller bottle machine (WNB-180R) Holds four standard roller bottles with a diameter of 100-120mm 9. CO2 incubator with built-in magnetic drive oscillator, suitable for suspension culture of mammals Put the WNB-101S at the bottom of the incubator, which can hold 100-1000ml shake flasks. Brushless DC motor makes the incubator low vibration, no dust, low noise, suitable for cell culture 10. Externally controlled roller bottle or shaker Roller bottles or shakers can be controlled externally without opening the box door using a cable
Specification
Display: LED display Volume: 180L Temperature control - range: room temperature +5-60°C Temperature control-display accuracy: ±0.1°C (37°C) Temperature Control - Resolution: 0.1°C Speed control - rate: 2~30rpm Speed Control - Accuracy: ±1rpm Speed control - step: 0.1rpm Speed control-control: digital microprocessor PID control technology Humidity: ≥70% (at 37°C) CO2 Control - Accuracy: ±0.1% (5% / 37℃ ) CO2 Control - Resolution: 0.1% CO2 Control-Sensor: Dual Beam Infrared CO2 Sensor CO2 Control-Control: Microcomputer Control Timing control: continuous operation or maximum 99h59min Jacket type: air jacket (six sides heated) Cavity Material: 304 Stainless Steel Shelf: One shelf for bottle roller
Features
Small volume CO2 shaking incubator. The 180L CO2 incubator can be built with a roller bottle machine or a shaker. Low-noise oscillation using DC brushless motor. The CO2, humidity and temperature in the cavity have good uniformity. The shaker and roller bottle machine can be disassembled for static culture. Standard universal flat plate, optional sticky sticky board. Various plate types (conical flasks: 100mL, 250mL, 500mL, 1000mL, test tube holder, 96-well plate holder). Natural humidification through bottom water pan heating. Multiple internal shakers outside the incubator are individually controlled. Speed, temperature and humidity are displayed and controlled on the LED screen.
Related Products
WIGGENS WCI-650 CO2 Incubator, 650L, Shinetek Instruments Research Institute (CAT#-STEM-CC-3485-LGZ) WIGGENS WCI-180S CO2 Shaking Incubator, 30-300 RPM, Shinetek Instruments Research Institute (CAT#-STEM-CC-3480-LGZ) WIGGENS WCI-180T Three-Gas incubator, 42L, Shinetek Instruments Research Institute (CAT#-STEM-CC-3481-LGZ) WIGGENS WCI-260 CO2 Incubator, 260L, Shinetek Instruments Research Institute (CAT#-STEM-CC-3482-LGZ) WIGGENS WCI-40 CO2 Incubator, 40L, Shinetek Instruments Research Institute (CAT#-STEM-CC-3483-LGZ) WIGGENS WCI-40T Three-Gas incubator, 42L, Shinetek Instruments Research Institute (CAT#-STEM-CC-3484-LGZ)