Unlock Exclusive Discounts & Flash Sales! Click Here to Join the Deals on Every Wednesday!

WIGGENS WI-203QR Biotron Large CO2 Incubator, Shinetek Instruments Research Institute (CAT#: STEM-CC-3504-LGZ)

Highlights

Good temperature control effect, temperature field uniformity: ± 0.5℃ / 37℃; With direct heating on 5 sides of the box, the heating output power is automatically adjusted according to the heating needs. Four circulating fans are installed at the back of the bottom of the box to ensure the uniformity of the temperature field, the distribution of CO2 concentration and the rapid recovery of the culture environment after opening/closing the door of the box.
Built-in power plug.
Embedded with 6 individual power supply jacks, evenly distributed on the left side of the cabinet, the embedded 6 jacks are individually powered, and do not interfere with the main power supply of the cabinet, and the power supply insurance of the 6 jacks is also independent.

Cat Number: STEM-CC-3504-LGZ

Application: For cultivation.

Model: WI-203QR

Add to Cart



Description

WIGGENS large-scale incubator/CO2 incubator uses 5 sides of the box for direct heating, and is equipped with 4 circulating fans to ensure the uniformity of the temperature field in the incubator.
Embedded with 6 separate power supply plugs, mutual non-interference ensures that the WIGGENS large-scale CO2 incubator can support a variety of culture equipment to operate independently in the box.
The large observation window with heating function enables the WIGGENS large carbon dioxide incubator to clearly observe the changes in the box outside the box, and there is no need to worry about the condensation of the liquid in the window, which will affect the observation.
WIGGENS CO2 incubator has a hole in the middle of the right side of the box, with a rubber stopper, which is convenient for sampling analysis and experimental verification.

Specification

Temperature range: +7ºC ~ +60ºC
Uniformity of temperature field: ±0.5~±0.7℃ /37℃ ( room temperature 25℃ )
Display resolution: ±0.1ºC
Condition recovery time after door opening and closing: 12 minutes after opening the door for 5 minutes to return to 37°C
Heating unit: direct heating on 5 sides of the cabinet, additional 4 circulation fans paralleled on the rear side of the bottom
Anquan setting: separate over-temperature protection cut-off
Display: digital display, 5-digit LED display temperature and CO2 concentration
Number of partitions: optional, up to 35
Box door: open the door on the left side, with heated glass observation window
Anquan power supply: fuse 15A / internal socket fuse 10A
Cabinet internal dimensions: 867.6(W) x 720(D) x 1927.3(H)mm
External dimensions of the box: 990(W) x 855(D) x 2123.5(H)mm
Box volume: 1204L
Box material: stainless steel 304
Power supply: 100V or 120V or 220V / 50 or 60Hz (670W)
CO2: 0~20%
CO2 Sensor Type: Dual Beam Infrared Sensor
CO2 control accuracy: ±0.1% at 5%
Built-in alarm settings: temperature, door open, CO2
Alarm output: temperature, CO2 trigger alarm, roller bottle machine failure trigger alarm

Features

Good temperature control effect, temperature field uniformity: ± 0.5℃ / 37℃; With direct heating on 5 sides of the box, the heating output power is automatically adjusted according to the heating needs. Four circulating fans are installed at the back of the bottom of the box to ensure the uniformity of the temperature field, the distribution of CO2 concentration and the rapid recovery of the culture environment after opening/closing the door of the box.
Built-in power plug.
Embedded with 6 individual power supply jacks, evenly distributed on the left side of the cabinet, the embedded 6 jacks are individually powered, and do not interfere with the main power supply of the cabinet, and the power supply insurance of the 6 jacks is also independent.
Large viewing window with heating function will not cause condensation of water vapor.
The bottom of the box is designed with rollers and fixed tracks for large roller bottle culture devices.
The box door lock can not only help the box to be sealed, but also can be manually locked to ensure the security of the sample.
The electronic components of the main control unit are installed in a separate and complete control box, which is convenient for engineers to maintain and repair.
There is a hole in the middle of the right side of the box, with a silicone plug, which is convenient for sampling and dividing, monitoring the cultivation process and verifying the equipment.
The inner cavity of the CO2 incubator is made of SUS304 stainless steel, which is convenient for cleaning and maintenance.
Optional analog output and RS485 interface.
Optional bracket partition can support 50Kg equipment.

Related Products

WIGGENS WH-15 Constant Temperature Incubator, 150L, Shinetek Instruments Research Institute (CAT#-STEM-CC-3496-LGZ)
WIGGENS WH-02 Mini Low Temperature Incubator, Shinetek Instruments Research Institute (CAT#-STEM-CC-3491-LGZ)
WIGGENS WH-05 Constant Temperature Incubator, 50L, Shinetek Instruments Research Institute (CAT#-STEM-CC-3492-LGZ)
WIGGENS WH-10 Constant Temperature Incubator, 100L, Shinetek Instruments Research Institute (CAT#-STEM-CC-3493-LGZ)
WIGGENS WH-11C Low Temperature Biochemical Incubator, Shinetek Instruments Research Institute (CAT#-STEM-CC-3494-LGZ)
WIGGENS WH-1200 Constant Temperature Incubator, 1200L, Shinetek Instruments Research Institute (CAT#-STEM-CC-3495-LGZ)
Advertisement