WJ-Ⅱ CO2 Cell Incubator Series, 80L, 300W, ShangHai CIMO Medical Instrument co.,Ltd. (CAT#: STEM-CC-0192-YJL)

YQX-Ⅱ Anaerobic Incubator, +3-65℃, model YQX-Ⅱ, is manufactured by ShangHai CIMO Medical Instrument co.,Ltd. The inner tank of this product is made of high-quality stainless steel material, which is clean and bright, and will never rust. It adopts microcomputer intelligent temperature controller and P.I.D. control, which makes temperature control stable, high precision, LED high-brightness digital display, intuitive and clear.

Volume: 80L
Heating method: air jacket
Temperature control range: RT+5~65℃
Temperature resolution: 0.1℃
Constant temperature fluctuation: ±0.2℃(37℃ when working stably)
CO2 control range: 0~20%
CO2 control method: ratio type
CO2 concentration recovery time: ≤5min
Humidification method: natural evaporation (water distribution tray)
Humidity range: less than 95%RH (+37℃ when working stably) Humidity is directly displayed by digital meter
Working time: 1-999 hours or continuous
Power: 300W
Power supply: AC 220V 50Hz
Number of Shelves: 2
Studio size: 400*400*500
Dimension: 550*610*820

With over-temperature sound and light alarm function.
Independent temperature limit alarm system, automatically interrupts immediately when the temperature exceeds the limit to ensure the smooth progress of the experiment (optional).
Double-layer door structure: After the outer door is opened, the experimental conditions of the studio are observed through the inner door made of high-strength tempered glass, and the temperature and humidity are not affected.
CO2 adopts proportional control, which is intuitive and easy to adjust.
The CO2 air inlet is equipped with a high-efficiency microbial filter, which can effectively filter particles larger than 3 μm in diameter, with a filtration efficiency of 99.99%, effectively filtering bacteria and dust particles in the CO2 gas (optional).
The independently set door heating system can effectively avoid the condensation phenomenon on the inner door glass and prevent the possibility of microbial contamination caused by the condensed water of the inner glass door.
In the work room, a water pan is used for natural evaporation and humidification, and the humidity is directly displayed by the meter.
The box is equipped with a UV germicidal lamp, which can regularly sterilize the culture room with ultraviolet light, thereby more effectively preventing the contamination of cells during the culture period.

HH.CP Incubator-CO2 (CAT#: STEM-CC-0113-YJL)
HH.CP Incubator-CO2 (CAT#: STEM-CC-0114-YJL)
WJ-Ⅱ CO2 Cell Incubator Series (CAT#: STEM-CC-0194-YJL)
WJ-Ⅱ CO2 Cell Incubator Series (CAT#: STEM-CC-0195-YJL)
WJ-Ⅲ CO2 Cell Incubator Series (CAT#: STEM-CC-0188-YJL)
WJ-Ⅲ CO2 Cell Incubator Series (CAT#: STEM-CC-0189-YJL)