Wolf 80-137 X-Ray Tilt and Rotate Cassette Holder with Extension Arm, Wolf X-Ray Corporation (CAT#: STEM-MIE-0232-LC)

The Wolf 80-137 X-Ray Tilt and Rotate Cassette Holder with Extension Arm manufactured by Wolf X-Ray Corporation is a mobile unit which can accommodate the cassette in different positions, including straight vertical, incline backwards, incline forward, rotate or oblique tilt, face up, and face down cassette or plate positions. The Tilt and Rotate Holder's arm slides vertically on a 60 inch chrome steel post, providing an adjustable height of 54 inches from the floor to the bottom of the cassette/plate. The arm has the ability to extend out from 11 - 23 inches from the post, but cannot hold DR Plates. The X-Ray Cassette Holder features a 18" x 18" base with four black casters in each corner and a neutral almond baked enamel finish.

Arm Extension: 11 to 23" (from post)
Base Dimensions: 18" × 18"
Cassette / Plate Positions: Six plus horizontal arm extension
Height Adjustable: Floor to 54" (from bottom of plate rack)
Post Height: 60"

Adjustable to 6 different positions
Arm extends horizontally 11-23 in from post
Arm slides vertically on a 60 inch chrome steel post
Max vertical position is 54 inches at bottom of cassette/plate
Not for use with DR plates
Base has 4 casters in each corner
Baked enamel finish in neutral almond

Wolf X-Ray 80-305 Equine Cassette/CR-Plate Holder, Wolf X-Ray Corporation (CAT#: STEM-MIE-0233-LC)