Unlock Exclusive Discounts & Flash Sales! Click Here to Join the Deals on Every Wednesday!

YRE-2011 New Rotary Evaporator, 660×320×510(760)mm, Gongyi Yuhua Instrument Co., Ltd (CAT#: STEM-GLE-0692-YJL)

Highlights

The main components of rotary evaporation:
1. Rotate the motor to drive the evaporating bottle by rotating
2. Evaporation pipe, the support shaft for the rotation of the evaporation bottle, and the vacuum-sealed pipe for extracting the steam from the material.

Cat Number: STEM-GLE-0692-YJL

Application: It is mainly used for continuous distillation of large quantities of volatile solvents under reduced pressure. In particular, the concentration of the extract and the distillation of the receiving liquid during chromatographic separation can separate and purify the reaction product.

Model: YRE-2011S

Add to Cart



Description

YRE-2011 New Rotary Evaporator, 660×320×510(760)mm, model YRE-2011S is manufactured by Gongyi Yuhua Instrument Co., Ltd. This product is a common laboratory equipment composed of a motor, a distillation bottle, a heating pot, a condenser and other parts.

Specification

Rotation speed: 0-120rpm
Evaporation capacity: Max×25ml/min (evaporation of water)
Achievable vacuum degree: 399.9pa (below 3mmHg)
Speed setting: knob type stepless speed change
Safety function: Overload protection function (fuse)
Lifting function: Manual weight balance method
Motor: output power 25w
Condensing pipe: inclined triple coil cooling area 0.27m²
Sample bottle: pear-shaped bottle 1L
Recycling bottle: pear-shaped bottle 1L (ball mill mouth S35/20)
Rotary connecting shaft: inner diameter 18×length 220mm (TS29/38)
Vacuum sealing ring: Teflon + Teflon Fluorine rubber double sealing ring
Interface diameter: mouth diameter 10mm
Frame: 450*320
Lifting stroke: 100mm+150mm (sliding lift+manual lift)
Ambient temperature: 5-35℃
Power supply: 0.16A/35VA
Rated power supply: AC2202V/50HZ
Dimensions (mm)): 660 width × 320 depth × 510 (760) height

Features

The main components of rotary evaporation:
1. Rotate the motor to drive the evaporating bottle by rotating
2. Evaporation pipe, the support shaft for the rotation of the evaporation bottle, and the vacuum-sealed pipe for extracting the steam from the material.
3. The vacuum system reduces the pressure in the evaporator system and reduces the boiling point of the material.
4. Heating bath, usually use water or oil to heat the material.
5. Condenser, in order to speed up the condensation efficiency, it is usually made into a double-snake surround type, and then a condensing agent such as dry ice and acetone is added to condense the sample.
6. The condensed water collection bottle at the bottom of the condenser is used to capture the distillation solvent after recondensation and collect the sample.
7. Lifting device, a mechanical or motorized mechanism that quickly lifts the evaporating flask from the heating bath.

Related Products

YRE-201C Rotary Evaporator (CAT#: STEM-GLE-0683-YJL)
YRE-201D Rotary Evaporator (CAT#: STEM-GLE-0682-YJL)
YRE-5299 Rotary Evaporator (CAT#: STEM-GLE-0684-YJL)
YRE-301 Rotary Evaporator (CAT#: STEM-GLE-0685-YJL)
YRE-2000A Rotary Evaporator (CAT#: STEM-GLE-0687-YJL)
YRE-2011 New Rotary Evaporator (CAT#: STEM-GLE-0692-YJL)
YRE-10-50L Series Explosion-proof Rotary Evaporator (CAT#: STEM-GLE-0695-YJL)
YRE-2010Z(10L) Large Rotary Evaporator (CAT#: STEM-GLE-0699-YJL)
Advertisement