43B Power Quality Analyzer, Fluke (CAT#: STEM-AIAEPO-1004-ZJF)

The manufacturer of the 43B Power Quality Analyzeris Fluke.
The product is located in Rochester, NY, USA.

Condition: Certified Pre-owned
Absolute Maximum Current Measurement: 1250kA
Absolute Maximum Power Measurement: 1.56GW
Number of Phases: 1, 3
Maximum Voltage: 600V ac
Best Voltage Measurement Accuracy: ±1% +10 Digits
Best Current Measurement Accuracy: ±1% + 10 Digits
Measurement Type: Capacitance, Continuity, Current, Diode Voltage Drop, Frequency, Harmonics, Inrush Current, Resistance, Sag, Swell, Transients, Voltage
Measurement Standards: EN61010-1
Interface Type: USB
Power Source: Battery
Battery Type: Rechargeable NiMH
Model Number p: 43
Battery Life: 4 h
Dimensions: 232 x 115 x 50mm
Minimum Frequency: 10 Hz
Maximum Frequency: 15kHz
Maximum Operating Temperature: +50°C
Width: 115mm
Length: 232mm
Weight: 1.1kg
Height: 50mm
Minimum Operating Temperature: 0°C

Voltage, current and power harmonics to the 51st, phase angle and THD
Sag and swell measurement down to one cycle, recorded over time
Voltage, current and frequency measurement, and waveform display
Power measurements - watts, power factor, displacement power factor, VA and Var
20 measurement memory to save/recall screens and data with cursor readings
Captures up to 40 voltage transients
Ohms, continuity and capacitance measurement
Temperature scaling for temperature accessories
Calculates 3-phase power on balanced loads

PM6685R Timer/Counter/Analyzer, Fluke
124 Industrial ScopeMeter, Fluke
5500A Multi-Product Calibrator, Fluke