454A Electrosurgical Analyzer, Fluke (CAT#: STEM-CTEPO-0189-ZJF)

The manufacturer of the 454A Electrosurgical Analyzeris Fluke.
The product is located in Irvine, CA, USA.

Condition: Certified Pre-owned
Display:
4 Lines x 42 Characters
32 x 256 Pixel Matrix
0.5" H x 0.5" W Numeric Font
Vacuum Fluorescent Technology
Case Construction:
Aluminum Frame with Polycarbonate Front Panel
Power Requirements:
< or = 0.75 Amps, 115 VAC 50/60 Hz
240 VAC 50/60 Hz
International:
230-volt power cords available for most countries upon request.
Temperature Range:
15° C to 35° C Operating
0° C to 50° C Storage
Oscilloscope Output:
~/= 2.5 Volt/Amp (uncalibrated)
Bandwidth:
3 dB (30 Hz - 7 MHz for instrumentation)
3 dB - 2.5 MHz for loads of 100W to 500W current & power readings
Crest Factor:
+/-10.0% of Reading (1.4 ³ CF £ 15.9)
Peak to Peak Voltage:
+/-10.0% of Reading (0-10 kV)
Load Resistance:
50 - 1550 Ohms (50 Ohms steps)
+/- 3.0% of Selected Load (@ DC)
Additional loads can be achieved by utilization of the optional Auxiliary Test Load Modules
RMS Power: +/-10% of Range (watts)
RMS Current:
+/-5.0% of Reading (100 mA-2000 mA)
+/-5.0% of Reading (30 mA-100mA) for Crest Factor < 16.0
Dimensions:
18.25" L x 12.50" W x 6.00" H
(46.36cm L x 31.75cm W x 15.24cm H)
Weight: 17 lbs (7.71 kg)

In excellent condition
Thoroughly cleaned
Fully tested to perform at manufacturer specifications

1524 Reference Thermometer Data Logger, Fluke
ESA612 Electrical Safety Analyzer, Fluke
MPS450 Patient Simulator, Fluke