5417R Centrifuge, Eppendorf (CAT#: STEM-LCPO-0174-ZJF)

The manufacturer of the 5417R Centrifugeis Eppendorf.
This high-performance microcentrifuge spins up to 25,000g and offers up to 30-place capacity for high throughput. The Eppendorf 5417R Centrifuge incorporates reinforced steel rotor housing and double lid locks. The maintenance-free, brushless induction motor reaches maximum speed within 12 seconds for quick separation and recovery of samples. Rotors are autoclavable.
Operating parameters of time, speed (or RCF), soft start/stop and momentary spins are entered on a touch-sensitive pad. The timer includes a hold function for longer spins. The soft start/stop function slows the acceleration and deceleration rate for delicate samples or filter tubes.
Eppendorf 5417R Centrifuge provides temperature control from –9 to 40°C (15.8 to 104°F). "Fast Cool" function lowers rotor bowl temperature from ambient to 4°C (39.2°F) in less than 20 minutes. Refrigerated units use CFC-free refrigerant.
The product is located in San Diego, CA, USA.

Condition: Certified Pre-owned
Power supply: 230 V / 50 Hz or 60 Hz, 120 V / 50 Hz or 60 Hz, 100 V / 50 Hz or 60 Hz
Power requirement: Centrifuge 400 W, Compressor 300 W
Max. rotational speed: 16,400 rpm
Max. centrifugal force: 25,000 rcf
Max. load: 30 x 2.0 ml
Max. density of material to be centrifuged: 1.2 g/ml
Range of control for refrigeration: -9 C to +40 C
Permitted ambient temperature during operation: 10 C - 35 C
Permitted maximum relative air humidity: 75%
Max. kinetic energy: 6,100 Nm
Dimensions (H x W x D): 250 x 310 x 597 mm
Weight: 34.8 kg
Degree of pollution: 2
Overvoltage category: II
Refrigeration time for "Fast Cool": from 20 C to 4 C: approx. 20 min.

In excellent condition
Thoroughly cleaned
Fully tested to perform at manufacturer specifications

Eppendorf Centrifuge 5415D, Eppendorf
Eppendorf Research Plus Single-Channel Pipette 20-200 µL, Eppendorf
Eppendorf Epp-022669940 Printed Circuit Board Control, Eppendorf