Agilent 1100 Series Capillary Pump (G1376A), Agilent Technologies (CAT#: STEM-CPO-0905-ZJF)

The manufacturer of the Agilent 1100 Series Capillary Pump (G1376A) is Agilent Technologies.
This system comes refurbished, and based on the reliable Agilent 1100 Series HPLC system, uses a unique pump technology that optimizes the system for capillary LC, offering a high level of sensitivity and reproducibility.
The Agilent 1100 Series capillary pump incorporates an electronic flow control (EFC) that measures and controls the actual flow rate, rather than depending on calculations. This assures flow rate stability throughout the analysis. The pump provides flow rates from 1µl/min up to 100µl/min, with full gradient capability for capillary LC and 2.5ml/min in normal mode for a wide range of flexibility.
A unique pump design offers better control and flexibility of low flow rates. This pump is ideally suited for capillary LC and LC/MS applications, like bio-pharmaceutical research, where sample volumes are limited and higher sensitivity is essential.

Condition: Pre-owned
Weight: 15.5 kg (34.2 lbs)
Dimensions (height × width × depth): 200 × 345 × 440 mm (8 × 13.5 × 17 inches)
Line voltage: 100 – 240 VAC, ±10 % Wide-ranging capability
Line frequency: 50 or 60 Hz, ±5 %
Power consumption (apparent power): 300 VA Maximum
Power consumption (active power): 200 W Maximum
Ambient operating temperature: 4 to 55 8C (41 to 131 8F)
Ambient non-operating temperature: -40 to 70 8C (-4 to 158 8F)
Humidity: < 95 %, at 25 to 40 8C (77 to 104 8F) Non-condensing
Operating Altitude: Up to 2000 m (6500 ft)
Non-operating altitude: Up to 4600 m (14950 ft) For storing the autosampler

Electronic flow control (EFC) – measures and controls the actual flow rate, rather than depending on calculations.
Flow rates – from 1 µl/min up to 100 µl/min, with full gradient capability for capillary LC and 2.5 ml min in standard mode for a wide range of flexibility
Retention time (RT) stability – independent from column back pressure for maximum performance
Accurate flow rates – even with solvent mixtures
Automatic purge valve
Low delay volume– through the use of microvolume components

Agilent 1100 Series Micro Vacuum Degasser (G1379A), Agilent Technologies
2465 Electrochemical Detector, Waters Corporation
Agilent 1260 Infinity Multiple Wavelength Detector MWD VL (G1365D), Agilent Technologies