AIR-10-ML Filter Fan Unit, 540x540x305 mm, Galvani (CAT#: STEM-C-0664-ZJF)

AIR-10-ML Filter Fan Unit AIR-10-ML 6P6 manufactured by Galvani is a self-contained unit for air filtration of medium size cleanrooms and laminated airflow systems, with easy installation and filter replacement.
The special mechanical configuration and the innovative clamping system provides easy installation.
Filters can be repalced without touching the unit.
The unit can be directly hung from the ceiling by the M6 corner supports or be connected the Grid-HT which makes it easy to install and remove the units.
The anodised aluminium plate made container box was appropriately bent and reinforced to create a sturdy and rigid structure.
Sound absorbent panels made of Cl. M0 mineral wool is covered with protective fabric to prevent the release of any pollution particles.
The radial electric fan with an EC motor is directly connected to aluminum rotor with reverse blades.
The EC controller is built into the fan for action, control and regulation.
H14, U15 or U16 efficiency absolute filter reduce pressure drop and is in accordance with EN1882:2009. The frame thickness is 66 mm, 90 mm or 110 mm.

TYPE: 6P6
FFU dimensions (LxPxH mm): 540x540x305
Grid pitch (LxPxH mm): 600x600
Power (W) (Rated) (0,45m/s 120Pa): 430 44
Sound level dB(A) (0,45m/s 120Pa): 52
Air Volume (m3/h): 421
Pressure Max (Pa): 21
Weight (Kg) (Filters not included): 00
Power supply: 200÷277 Vac - 1N - 50/60 Hz

Options:
Panel prefilter, G4 class, in accordance to EN779:2012, fitted into an appropriate anodized aluminium housing.
Heat exchanger in copper/aluminium, max. capacity 4kW, fitted into an appropriate anodized aluminium housing.
Interface board for LON control.

Structure made of anodised aluminium
Absolute filter fixed to the housing
EC technology energy efficient fan
Cl. 0 class fire reaction
BUS controlled
ebmBUS, LONBUS available
H14, U15, U16 efficiency filters available
Standard filters
Low noise
High quality fan without maintenance
3 sizes available for different requirements

AIR-10-IT Filter Fan Unit, 572x572x360 mm, Galvani
AIR-10-IT Filter Fan Unit, 572x1172x360 mm, Galvani
AIR-10-IT Filter Fan Unit, 1172x1172x440 mm, Galvani
AIR-10-ML Filter Fan Unit, 540x1140x305 mm, Galvani
AIR-10-ML Filter Fan Unit, 1140x1140x380 mm, Galvani
AIR-10-ME Filter Fan Unit, 770x343x388 mm, Galvani