AseptiQuik® S (CAT#: AM-BP-0519-LC)

AseptiQuik® S Connectors with available size in ⅛ in. , ¼ in. and ⅜ in. are designed to ensure rapid and easy sterile or non-sterile connections between small-flow fluid paths.

Pressure: Up to 4.1 bar
Temperature: 4°C to 40°C
Flow Rate: Cv 1.74 for ¼ in. to ¼ in. and 0.19 for ⅛ in. to ⅛ in.
Material of main component: Polycarbonate (white), USP Class VI, ADCF
Material of Pull Tabs/Covers: Polycarbonate (blue, standard version), USP Class VI, ADCF Polycarbonate (white, HT version), USP Class VI, ADCF
Material of Seals: Silicone (clear), platinum-cured, USP Class VI, ADCF
Material of Membrane: Polyethylene (standard version), USP Class VI, ADCF Hydrophobic polyethersulfone (HT version), USP Class VI
Termination Size: ⅛ in., ¼ in. and ⅜ in. ID hose barb (3.2 mm, 6.4 mm and 9.5 mm), ¾ in. sanitary and MPC insert connector
Gamma Irradiation: Up to 50kGy
Autoclave Sterilization: Up to 130°C for 30 minutes

Genderless design simplify single-use systems specifications with one part number for both halves
Error caused by the operation is reduced by intuitive three-step connection process
Integrated pull tab covers reduce complexity and ensure that remove both membranes at same time
Robust construction permits repeatable and reliable performance without requiring additional hardware
"Click" provides hearable confirmation of assembly