Arthrex BioComposite Interference Screw Driver, Quick Connect In Mokena, IL, USA, model AR-1996CD-1 is manufactured by Arthrex general medical equipment. The BioComposite Interference Screw Drivers are an industry-first for efficiency and strength. The hexalobe design of the driver tip interfaces completely with the BioComposite Interference Screw efficiently distributing torque, eliminating torque strip. The driver fully supports the entire length of the screw, eliminating screw breaking if divergent screw insertion is encountered. The driver tips are laser marked to signify when each screw is fully seated on the driver, and the shafts are laser marked in 5 mm increments to facilitate tunnel sizing and verification of screw insertion depth. The drivers are available in a solid handle version and a quick connect version to use with a ratcheting handle. These cannulated drivers allow for insertion into the joint over a flexible guide wire.
Specification
Condition: used
Related Products
[Expired] Arthrex Bio-Tenodesis Screw, 7.0 mm x 10.0 mm In Mokena, IL, USA (CAT#: STEM-CTEPO-0503-YJL) [Expired] Arthrex Bio-Tenodesis Screw, 8.0 mm x 12 mm In Mokena, IL, USA (CAT#: STEM-CTEPO-0504-YJL) [Expired] Arthrex BioComposite Interference Screw, 7 mm x 23 mm In Mokena, IL, USA (CAT#: STEM-CTEPO-0505-YJL) [Expired] Arthrex 8.0 mm x 20.0 mm Cannulated Interference Screw In Mokena, IL, USA (CAT#: STEM-CTEPO-0506-YJL) [Expired] Arthrex Screw, Cancellous, Low Profile, 6.5 mm x 25.0 mm In Mokena, IL, USA (CAT#: STEM-CTEPO-0529-YJL) [Expired] Arthrex Reverse Thread RetroScrew Device, 10 mm x 20 mm In Mokena, IL, USA (CAT#: STEM-CTEPO-0530-YJL)