Condition: certified pre-owned
Analytical System: Fully automated, random access chemistry system with STAT capability
Analytical Principle: Spectrophotometry and potentiometry
Analytical Types: Endpoint, rate, fixed point and indirect ISE
Analytical Methods: Colorimetry, turbidimetry, latex agglutination, homogeneous EIA, indirect ISE
Simultaneously Processed Analytes: 60 photometric tests + 3 ISE, 120 pre-programmed onboard tests
Throughput: 400 photometric tests/hour; maximum of 800 with ISE
ISE Throughput: 200 samples/hr. Maximum tests/hr: 600 if ISE only
Sample Types: Serum, plasma, urine, other
Sample Feeder: Racks with 10 samples each (barcodes on primary tubes and on racks); capacity of 80 samples; continuous loading
Sample Tubes: Primary and secondary tubes; diameter from 11.5 to 16 mm; height from 55 to 102 mm, nestled micro sample cups
STAT samples: Up to 22 positions for STAT samples via cooled turntable. Easy-to-operate interrupts between tests. Auto-repeat run capability.
Sample Volume: 1–25 μl in 0.1 μl steps (1-25 μl for repeats)
Reagent Capacity: 76 positions for (R1+R2, detergent position). Holds 15, 30 and 60ml bottles.
Reagent Storage: Refrigerated (4–12°C)
Reagent Volume: R1: 10–250 μl; R2: 10–250 μl (in 1 μl increment)
Total Reaction Volume: 90–350 μl
Reaction Cuvette: Permanent glass cuvettes
Reaction Time: Up to 8 minutes, 37.5 seconds
Reaction Incubation: 37°C, dry bath
Photometry System: Direct assay through the reaction cuvette (0–3.0 OD) mono and bichromatic measurements possible
Wavelength: 13 different wavelengths between 340–800 nm
Calibration: Auto calibration, cooled calibrator positions; master calibration established by two-dimensional barcode
Quality Control: Auto QC, cooled QC positions
Rerun: 1. Auto rerun and manual rerun available; 2. Automatic sample increase, decrease or normal repeat; 3. Reflex testing
Sample Pre-dilution: Dilution ratio: Fixed to 3, 5, 10, 15, 20, 25, 50, 76 or 100
Test Requisition: Individual and profile test requisition via online, mouse, function keys and touch-screen
Sample Integrity: Lipaemia, Haemolysis and Icterus analysis. Sample clot detection and probe crash protection.
Online: RS232C. Full uni- and bidirectional communication possible.
Software: Windows 7®
Data Storage: Sample number 100,000 samples. Reaction Data 200,000 tests.
Dimensions (W x H x D): ANL: 1,450 x 1,205 x 760
Power Supply: 100–240v; 60 Hz/ < 3.5 kVA