Bidirectional Microfluidic Flow Sensor, FLOW UNIT PLUS-XS, Fluigent (CAT#: STEM-ME-0300-WXH)

The FLOW UNIT and FLOW UNIT+ are bidirectional microfluidic flow sensors compatible for stand-alone use with the Line Up™ controller or other microfluidic control systems such as the MFCS™ series using the Flowboard hub.
Available in multiple low rate ranges, the FLOW UNIT and FLOW UNIT + Microfluidic Flow Sensor allows for pressure regulation using the DFC (Direct Flow Control) algorithm to monitor or control the system by flowrate instead of pressure.

Sensor performance
Calibrated media: Water
Range: 0±1.5µL/min
Accuracy (m.v.= measured value): (Water) 10% m.v. above 75 nL/min, 7.5 nL/min below 75 nL/min
Lowest detectable flow increment: 3.7 nL/min
Repeatability: (Water) <1% m.v. above 90 nL/ min
0.9 nL/min below 90 nL/min

Mechanical specifications
Sensor diameter: 25 µm
Maximum pressure: 200 bar
Wetted materials: PEEK & Quartz Glass
Inner volume: 1µL
Fluid connector ports: UNF 6-40 for 1/32” OD tubing
Weight: 97 g

Microfluidic In-Line Pressure Sensor, -345 to 345 mbar, PRESSURE UNIT, Fluigent (CAT#:STEM-ME-0309-WXH)
Highly stable fluorosurfactant, for microdroplet generation, Fluigent (CAT#:STEM-ME-0340-WXH)
Mitos Flow Rate Sensor, 70-1500 nL/min, dolomite, dolomite (CAT#:STEM-ME-0351-WXH)