The Bio-Rad GS-700 Imaging Densitometer is a high-performance laboratory instrument. This third generation scanning densitometer allows conversion of transparent and opaque electrophoretic samples into digital images for further densitometric analysis. Color spots such as silver and Coomassie blue can be collected conveniently with this system.
Depending on user preference, images produced by the Bio-Rad GS 700 can be exported to other software packages for further analysis. A base version of Bio-Rad's Quantity One software is included with system purchase.
Specification
Condition: certified pre-owned Color Separation: Single CCD sensor in conjunction with fluorescent lamps and three RGB filters Scanning Resolution: Variable resolution from 25 to 1200 dpi Gray Scales: 12-bit A/D conversion Effective Scanning Area: 21 cm x 35.5 Reflective Mode; 20 cm x 25.5 Transmittance Mode Interface: SCSI Interface – Double Connector Transmission Speed: 1 Mbyte/second Lamp: 8W daylight fluorescent light Warm up time: 35 seconds, 5 minute for stable operation Voltage: Line voltage: 90 to 264 volts; Frequency: 47 to 63 Hz; Power: 40 watts maximum Weight: Approx. 16.1 kg Dimensions (L x W x H): 60 cm x 41 cm x 20 cm Environment: Operating temperature: 10’C to 55’C; Storage temperature: -25’C to 55’C; Relative humidity: 20 to 95%; Surrounding space: 15 cm on each side
Features
Adjustable resolution from 25 to 1200 dots per inch (dpi) Reflectance and Transmittance Modes Equipped with a fixed platen for higher reliability Flexible wavelength lamp or filter structure to improve chromatic aberration Convert electrophoretic samples from analog to digital data form