Carbon Dioxide Cell Incubator, Water Jacket, Dimensions 77x79x108cm, 2100W, 270L

Description

The water jacket or air jacket structure is adopted, and the studio is made of high-quality stainless steel;
When the door is opened, the fan is automatically turned off (WJ-3 type closes the CO2 inlet valve at the same time) and the heating is stopped to reduce the pollution caused by the entry of air. The temperature adopts microcomputer data analysis and intelligent P.I.D control, which has high precision and strong anti-interference ability. And three probes are used to control the temperature of the box, the temperature of the water and the temperature of the door, so that the temperature of the studio has high precision and small fluctuations. (The air jacket type is a double probe, which controls the temperature of the box and the door separately)
Light touch adjustment switch, light and flexible. The displayed and set parameters are all digitally displayed, and each working state has LED indication
It has various protection functions such as over-temperature, water shortage, and gas cut-off to ensure the safe operation of the equipment
UV sterilization lamps are used to reduce contamination
Natural evaporation and humidification to maintain a better humidity in the studio

Specification

Dimensions (cm): 77x79x108
Studio size (cm): 60x60x75
Nominal volume: 270L
Net weight/gross weight (kg): 132/165
Rated power (W): 1200W (air jacket)/ 2100W (water jacket)
Shelf: standard 3 block/multi section adjustable
External material: cold rolled steel plate surface spray plastic
Interior material: stainless steel plate
Outer door: cold rolled steel plate surface sprayed with plastic
Inner door: tempered glass
Heat insulation: polystyrene film material
Temperature control range: room temperature 3℃ ~60℃ (ambient temperature 5℃ ~35℃)
Temperature control mode: PID control mode
Heating mode: 1. Air jacket type 2. Water jacket type
Circulation mode in the box: breeze stirring mode
Temperature fluctuation: ≤ ±0.3℃
Temperature uniformity: ≤ ±0.5℃
Timing range: 1.1~9999min 2. Continuous operation without timing
CO2 concentration control range: 0~20%
CO2 control mode: imported infrared sensor solenoid valve switch mode
Humidification method: natural evaporation of the humidified water pan
Sterilization method: UV sterilization UV
Alarm function: overtemperature alarm, temperature probe damage alarm, (water shortage alarm), CO2 concentration alarm, CO2 gas failure alarm

Features

The water jacket or air jacket structure is adopted, and the studio is made of high-quality stainless steel;
When the door is opened, the fan is automatically turned off (WJ-3 type closes the CO2 inlet valve at the same time) and the heating is stopped to reduce the pollution caused by the entry of air. The temperature adopts microcomputer data analysis and intelligent P.I.D control, which has high precision and strong anti-interference ability. And three probes are used to control the temperature of the box, the temperature of the water and the temperature of the door, so that the temperature of the studio has high precision and small fluctuations. (The air jacket type is a double probe, which controls the temperature of the box and the door separately)
Light touch adjustment switch, light and flexible. The displayed and set parameters are all digitally displayed, and each working state has LED indication
It has various protection functions such as over-temperature, water shortage, and gas cut-off to ensure the safe operation of the equipment
UV sterilization lamps are used to reduce contamination
Natural evaporation and humidification to maintain a better humidity in the studio

Other recommended products

Shinetek Multifunctional Cell Shaking Incubator, Multitron Three-Layer Incubator, Shinetek Instruments Research Institute (CAT#: STEM-CC-3309-LGZ)
Constant Temperature and Humidity Incubator BJPX-HT150/II, Biobase (CAT#: STEM-GLE-1331-LKN)
Water-proof Electric Thermostatic Incubator, Overall Dimensions 750×710×1055 mm, Internal Size 600×600×750 mm, 1530 W, Shanghai Boxun Medical Biological Instrument Corp. (CAT#: STEM-GLE-0389-LGH)
Constant Temperature and Humidity Incubator MINC023, 350L, STE-Mart (CAT#: STEM-CC-3597-LC)
All Stainless Steel Electric Heating Constant Temperature Incubator, Natural Convection, Dimensions 57x26x27cm, 300W (CAT#: STEM-GLE-1523-LGH)
Eppendorf® Galaxy® 48R CO2 Incubator, 0.2-20% (CO2 Range), 1-19% (O2 Control), Eppendorf AG (CAT#: STEM-LC-0220-LKN)
MJ-Ⅲ Mold Incubator Series, 350L, 1000W, ShangHai CIMO Medical Instrument co.,Ltd. (CAT#: STEM-CC-0213-YJL)
GYROMAX™ 727 Refrigerated Orbital Incubator Shaker (CAT#: AM-LE-1305-Y)

Carbon Dioxide Cell Incubator, Water Jacket, Dimensions 77x79x108cm, 2100W, 270L (CAT#: STEM-GLE-0931-LGH)

Highlights

Description

Specification

Features

Other recommended products