Constant temperature Water Tank and Water Bath Pot (Dual Purpose), RT+5～99℃, 280×130×150 mm, 280×130×150 mm, Shanghai Yiheng Scientific Instruments Co., Ltd (CAT#: STEM-GLE-0184-YJL)

Constant temperature Water Tank and Water Bath Pot (Dual Purpose), RT+5～99℃, 280×130×150 mm, 280×130×150 mm, model BWS-0505 is manufactured by Shanghai Yiheng Scientific Instruments Co., Ltd. The newly launched BWS series water tank/water bath dual-purpose tank is based on the company's many years of successful experience in the research and development and production of water tanks and water baths. Through continuous research, it has broken through the existing domestic water tanks and water baths. Compared with general sinks and water baths, BWS series has the following characteristics: the collection tank and the water bath are integrated, and one tank can be used for two purposes. The stainless steel inner tank is formed by one-time stamping, and has the function of water shortage and air burning prevention and independent temperature limit safety system to ensure safe operation without accidents.

Voltage: AC220V 50HZ
Power Consumption: 1200W
Temperature Range: RT+5～99℃
Thermostatic Fluctuation: ±0.3℃
Tracking Alarm: ±2℃
Internal Dimension(mm)W×D×H: 280×130×150, 280×130×150
External Dimension(mm)W×D×H: 450×395×260
Timing Range: 0～5999min
Remarks: Two holes+Two holes

● The collecting tank and the water bath are integrated, and one tank can be used for two purposes.
● The stainless steel inner tank is formed by one-time stamping, which is convenient for cleaning the inner tank.
● Liquid crystal display, multi-group data display on one screen, menu-type operation interface, with timing function, simple and easy to understand, easy to observe and operate. (optional multi-segment program controller)
● Stainless steel mesh shelf can cover important parts such as heaters and sensors to avoid damage during use.
● The size of the beaker hole can be adjusted arbitrarily.
● One-time forming flat stainless steel cover.
● The top cover can prevent water evaporation and water dew from entering the test sample to cause contamination. (optional)
● Can place test tube clamps. (optional)

security function:
● It has the function of preventing air-burning due to lack of water. When the phenomenon of lack of water occurs, the heater will be cut off immediately to ensure the safe operation of the instrument.
● Independent temperature limit alarm system, so that the samples can be reliably protected without accidents.
● High or low temperature and over-temperature alarm.

Convenient data processing (optional)
● It can be connected to micro printer, 485 communication software and interface or USB data interface (U disk).
● Record the temperature and time with a computer and a micro-printer to provide a strong guarantee for the storage and playback of experimental data.

Electric Thermostatic Water Tank(CAT#: STEM-GLE-0151-YJL)
Electric Thermostatic Water Tank(CAT#: STEM-GLE-0152-YJL)
Electric Thermostatic Oil Bath Pot(CAT#: STEM-GLE-0169-YJL)
Electric Thermostatic Oil Bath Pot(CAT#: STEM-GLE-0170-YJL)