Corona 70-6186A Charged Aerosol Detector, ESA (CAT#: STEM-CPO-0824-ZJF)

The manufacturer of the Corona 70-6186A Charged Aerosol Detector is ESA.
HPLC detector ESA Corona 70-6186A delivers near universal detection and quantitation. The traditional universal detectors have not delivered on the promise of application versatility and performance.

Condition: Pre-owned
Operating Mode: Charged Aerosol Detector
Mobile Phase Flow Rate: Up to 2 mL/min
Wettable Surfaces: 316 stainless steel
Full Scale Output Range: 1 pA to 500 pA in 1-2-5 sequence
Filter Time Constants: None, Low, Medium, High
Noise Specification: < 750 fA peak to peak (20% methanol/80% water)
Signal Output: 0V to 1V DC
Output Resolution: 0.12 μV at 1V full scale
Maximum Sampling Rate: 3.5 samples/sec
Output Offset: ± 50% of the selected current range in 1% steps
Event Marker: Triggered by keypad, timed operation or RS232 control, width, height, polarity
Autozero: Triggered by front panel keypad, rear panel contact closure, timed operation or RS232 control
Function Keys: Autozero, Event Marker, Gas On/Off
RS232 Interface Capability: Full parametric instrument control
Method Storage: Up to 25 methods (any combination of Fixed Mode and Timeline)
Settable Temperature Range (Thermal Organizer Option): (Ambient +5°) to 60°C
Temperature Stability (Thermal Organizer Option): < ± 0.5°C
Warm-up Time (Thermal Organizer Option): < 30 minutes (typically)
Temperature Accuracy (Thermal Organizer Option): ≤ ± 0.5°C
Nebulizer Heater: Factory set at 30o C (CoronaPlus CAD detector only)

Refurbished to meet manufacturer's specification
In excellent condition
Thoroughly cleaned
Certified with warranty

TurboVap LV Evaporator (Automated Evaporation System), Zymark
Agilent G3199B Quiet Cover II, Agilent Technologies
Thermo Electron Trace GC Ultra with Thermo DSQ II MS and Thermo AS 3000 Auto Sampler, Thermo Fisher Scientific