Criti-Clean™ FFU, 48" x 24", AJ Manufacturing (CAT#: STEM-C-0603-ZJF)

Criti-Clean™ FFU manufactured by AJ Manufacturing is a reliable fan powered laminar flow HEPA/ULPA filter diffuser for critical environments.
The unit combines vertical air mass laminar flow technology with ECM fan technology to provide a non-aspirating, low velocity, uniformly distributed downward moving "piston” of filtered air.
The unit provides a uniform airflow with high flexibility in clean environments in buildings where existing HVAC systems would typically cause constraints.
The unit can be customized for specific requirements.

Size [in.]: 48 x 24
Operating Range [fpm]: 25-145
Max. Airflow [cfm]: 685
Min. Airflow [cfm]: 120
Airflow @ 90 fpm [cfm]: 429
Initial Resistance @ 90 fpm [in.-w.g.]: 0.45
Weight [lbs.]: 90
Sound @ 90 fpm [dBA]: 51

Options:
Built-in white or green surgical grade LED lights
Available Sizes: 48" x 24", 36" x 24" and 24" x 24"
Available Voltages: 120, 208, 240 and 277
20 gauge Aluminum Construction
PAO injection port and dispersion manifold
Dirty filter indicator light

Stainless steel 304 frame and fully welded plenum, #4 satin polished finish, in line with the latest pressure test standards.
Constant airflow of 250-700 CFM over a wide range of static pressures, higher than other units.
Variable speed ECM motor with internal microcomputer can be computer controlled to assure high performance with low energy consumption and long service life.
HEPA or ULPA filters with separatorless 2" (51mm) deep media, integral test port and anodized aluminum gel seal frame.
Constant airflow compensating for changes in static pressure and filter load, greatly reducing the need for future balancing.
In accordance with Institute of Environmental Sciences and Technology (IEST) recommended practices.
Room side digital CFM display and control for quick check and adjustment.
Room side removable filter and pre-filter for easy replacement and maintenance.
Up to 800 units can be grouped together for customizable control.
Removable faceplate secured by 1/4 turn fasteners for easy cleaning.
Safety cables prevent removable face from accidental dropping.
51% free perforated face with 3/32" (2.4mm) diameter holes on 60º 1/4” (6mm) staggered centers
Integral anti-seismic hanger tabs prevent earthquake damage to the unit.
Regular, rectangular and oval duct connections are enabled by round duct inlets.
Suitable for both lay-in t-bar ceiling systems and surface mount applications.
Clear anodized extruded aluminum filter frame with test port for filter pressure drop leakage (scan) tests
Filters are packed separately for final field installation field by the installer.

Criti-Clean™ FFU, 24" x 24", AJ Manufacturing
Criti-Clean™ FFU, 36" x 24", AJ Manufacturing