DC150-1 Dry Nitrogen Blower, 1 piece, YOONING (CAT#: STEM-GLE-4096-LGZ)

The DC150 nitrogen blowing instrument series is a multi-channel sample concentration device combining a PID temperature-controlled metal bath and a nitrogen purging device. The evaporation rate and boiling point of the solvent are determined, and the heating temperature is set to achieve rapid concentration of batch samples. The instrument adopts aluminum heating module, which has good heat transfer and uniform heat transfer, which is conducive to rapid heating and rapid temperature control. Nitrogen gas is blown onto the sample surface to achieve an oxygen-free concentration of liquid samples.

Temperature control range: room temperature +5°C ~150°C
Heating time: ≤ 30 min (from 20°C to 150°C)
Temperature Stability @40°C: ±0.3°C
Temperature Stability @100°C: ± 0.5°C
Temperature Stability @120°C: ± 1°C
General configuration module: 1 piece
Timing time setting: 0~99h59m
Nitrogen flow: 0~12L/min
Nitrogen pressure: ≤0.2MPa
Dimensions (W×D×H): 220×290×540 (mm)
Maximum power: 200W
Net weight: 3.9kg

1. The gas needles are independent of each other and will not cause cross infection.
2. The gas flow of each gas needle can be adjusted individually.
3. Each blowpipe channel can be used in combination or alone.
4. Each gas needle flow control valve corresponds vertically to the module hole position, and the adjustment is intuitive and convenient.
5. The system has high temperature control accuracy, wide temperature control range and convenient temperature calibration.
6. The lifting mechanism has double protection of damping anti-skid device and fastening screw, which is safer to use.
7. The lifting mechanism has a scale display, the positioning is accurate and clear, and the data uniformity between batches is improved.

MD200-1 Dry Nitrogen Blower, RT+5°C~150°C, Shanghai Huxi Industrial Company Limited(CAT#-STEM-GLE-4087-LGZ)
MD200-2 Dry Nitrogen Blower, RT+5°C~150°C, Shanghai Huxi Industrial Company Limited(CAT#-STEM-GLE-4088-LGZ)
ST-12 Water Bath Nitrogen Blower, Process 12 Samples, Shanghai Huxi Industrial Company Limited(CAT#-STEM-GLE-4089-LGZ)
ST-24 Water Bath Nitrogen Blower, Process 24 Samples, Shanghai Huxi Industrial Company Limited(CAT#-STEM-GLE-4090-LGZ)
ST-36 Water Bath Nitrogen Blower, Process 36 Samples, Shanghai Huxi Industrial Company Limited(CAT#-STEM-GLE-4091-LGZ)
ST-48 Water Bath Nitrogen Blower, Process 48 Samples, Shanghai Huxi Industrial Company Limited(CAT#-STEM-GLE-4092-LGZ)