Determination Metal Ions (Co2+) by On-line Complexion Combined with Micelle to Solvent Stacking in Capillary Electrophoresis (CAT#: STEM-ET-0026-ZJF)

Introduction

Cobalt (Co), a component of vitamin B12, contributes to the synthesis of hemoglobin and increases the number of red blood cells by stimulating the hematopoietic system of the human bone marrow.
Nickel (Ni) is an essential trace element with potential toxicity. Copper (Cu) is one of the indispensable metal elements of the human body. Cu has a function of promoting bone metabolism and has certain antibacterial activities, but excess Cu takes potential risks to the kidney, gastrointestinal tract, movement and sensory nerves. Exposure to high mercury (Hg) likely causes brain damage, inflammation, autoimmunity, and affects the development of the nervous system. Exposure to cadmium (Cd) which was partly produced by industrial emissions or smoking causes kidney and liver toxicity and influences the normal growth of the embryos. This service provides a direct on-line complexion combined with micelle to solvent stacking method for simultaneous determination of metal ions by capillary electrophoresis coupled diode array detector.

Add to Cart Please Inquire

Principle Applications Procedure Materials Notes Related Products

Principle

Capillary Electrophoresis (CE) is physical method of analysis which performs in a separation channel of elastic quartz capillary, under the influence of a high voltage direct current field. Charged analytes dissolved in an electrolyte solution are separated based on differences in mobility and/or distribution behavior of components. The migration velocity of an analyte under an electric field is determined by the electrophoretic mobility of the analyte and the electro-osmotic mobility of the buffer inside the capillary. The electrophoretic mobility of a solute depends on the characteristics of the solute (electric charge, molecular size and shape) and those of the buffer in which the migration takes place (type and ionic strength of the electrolyte, pH, viscosity and additives). Capillary electrophoresis provides greater resolution, higher sensitivity and online detection. It enables single-cell analysis and even single-molecule analysis, optimizing separation and analysis of biological macromolecules.

Applications

Biomedical, clinical, pharmaceutical, forensic, industrial, and food analysis

Procedure

1. Preparation: Preheat the capillary electrophoresis apparatus and flush the capillary with no voltage applied. Prepare mixed standard samples and buffer solution.
2. Sample Application: Put the appropriate amount of mixed standard samples in the sample tube at the corresponding position at the inlet of the capillary electrophoresis apparatus, and put the appropriate amount of buffer in the sample tube at the corresponding position of the apparatus.
3. Electrophoresis: Switch on the electrophoresis apparatus and set the voltage and program. Initiate automatic sampling, electrophoresis, and analysis.
4. Determination: Record and analyze the migration of each component. Capillary electrophoresis apparatus can be connected with various detectors to detect the separation. The most widely used is the UV-visible spectrophotometric detector. After the experiment, flush the capillary again.

Materials

• Capillary electrophoresis apparatus
• Sample solution
• Buffer solution

Notes

1. When an electric field is applied through the capillary filled with buffer, a flow of solvent is generated inside the capillary, called electro-osmotic flow (EOF). The reproducibility of CE separation will be seriously affected by small changes in EOF. For some applications, it is important to control EOF by modifying the inner wall of the capillary or by changing the concentration, composition and/or pH of the buffer solution.
2. The definition and automation of the injection process are critical for precise quantitative analysis. Modes of injection include gravity, pressure or vacuum injection and electrokinetic injection.
3. The employed electrolytic solution should be filtered to remove particles and degassed to avoid bubble formation that could interfere with the detection system or interrupt the electrical contact in the capillary during the separation run.
4. A rigorous rinsing procedure should be developed to achieve reproducible migration times of the solutes.

Other recommended products

Automated N-Glycosylation Sequencing of Biopharmaceuticals by Capillary Electrophoresis (CAT#: STEM-ET-0288-ZJF)
Characterization of Therapeutic Monoclonal Antibodies by Capillary Electrophoresis-Mass Spectrometry (CAT#: STEM-ET-0049-ZJF)
Determination of Phenolic Compounds (Ferulic Acid) by Capillary Electrophoresis (CAT#: STEM-ET-0147-ZJF)
Determination of Nevadensin in Malan Ganhan capsules by Capillary Electrophoresis (CAT#: STEM-ET-0213-ZJF)
Separation and Determination of 3′-Hydroxypuerarin in Radix Puerariae by Capillary Electrophoresis (CAT#: STEM-ET-0123-ZJF)
Determination of Synthetic Dyes in Ice-Cream by Capillary Electrophoresis (CAT#: STEM-ET-0278-ZJF)
High Enrichment of Nucleobase-modified Aptamers in Early Selection Rounds by Microbeads-assisted Capillary Electrophoresis SELEX (CAT#: STEM-ET-0115-ZJF)
Determination of Vanillin and Related Flavor Compounds in Cocoa Drink by Capillary Electrophoresis (CAT#: STEM-ET-0302-ZJF)