Dionex Corona 70-6186A CAD Detector, Dionex (CAT#: STEM-CPO-0784-ZJF)

The manufacturer of the Dionex Corona 70-6186A CAD Detector, Dionex is Dionex.

Condition: Refurbished, Certified Pre-owned
Operating Mode: Charged Aerosol Detector
Mobile Phase Flow Rate: Up to 2 mL/min
Wettable Surfaces: 316 stainless steel
Full Scale Output Range: 1 pA to 500 pA in 1-2-5 sequence
Filter Time Constants: None, Low, Medium, High
Noise Specification: < 750 fA peak to peak (20% methanol/80% water)
Signal Output: 0V to 1V DC
Output Resolution: 0.12 μV at 1V full scale
Maximum Sampling Rate: 3.5 samples/sec
Output Offset: ± 50% of the selected current range in 1% steps
Event Marker: Triggered by keypad, timed operation or RS232 control, width, height, polarity
Autozero: Triggered by front panel keypad, rear panel contact closure, timed operation or RS232 control
Function Keys: Autozero, Event Marker, Gas On/Off
RS232 Interface Capability: Full parametric instrument control
Method Storage: Up to 25 methods (any combination of Fixed Mode and Timeline)
Settable Temperature Range (Thermal Organizer Option): (Ambient +5°) to 60°C
Temperature Stability (Thermal Organizer Option): < ± 0.5°C
Warm-up Time (Thermal Organizer Option): < 30 minutes (typically)
Temperature Accuracy (Thermal Organizer Option): ≤ ± 0.5°C
Nebulizer Heater: Factory set at 30o C (CoronaPlus CAD detector only)
Optional: ESA Corona gas conditioning module

Refurbished to meet manufacturer's specification
In excellent condition
Thoroughly cleaned
Money back guarantee
Certified with warranty

Dionex ASE Extraction Cells, Dionex
ASE 100 Accelerated Solvent Extractor, Dionex
ASE 200 Accelerated Solvent Extractor, Dionex