The manufacturer of the Dionex GP40 Gradient Pump, Dionex is Dionex. Refurbished Dionex GP40/GP-40 (model GP 40-1) Gradient Pump Dual-piston, variable speed, 100 µL stroke. Flow rate - 0.04 to 10.0 mL/min, in increments of 0.01 mL/min. Operating pressure: 35 MPa (5000 psi) maximum. (PEEK and stainless steel options available). The GP40 Gradient Pump is an integral part of a DX 500 chromatography system. It is a microprocessor-based, dual-piston, variable-speed, gradient delivery system designed to blend and pump mixtures of up to four different mobile phases at precisely controlled flow rates. The pump can deliver the selected mobile phase composition isocratically, or as a multistep linear or curved gradient. A Digital Signal Processor (DSP) provides high speed control of pump flow and pressure. The GP40 can operate as a stand-alone product or with other Dionex modules as part of a complete chromatography system. It can also be used with non-Dionex modules that meet interface requirements for software, TTL, or relay control. The GP40 can be controlled locally, using the front panel keypad and display, or from a remote host computer with a Dionex DX LANÔ interface installed and PeakNet software installed on the host computer. Limited remote control is also available from any device capable of providing compatible TTL signals to control the pump. The pump's two basic modes of control, Direct control and Method control, enable it to operate with or without reference to time-based events.
Specification
Condition: Refurbished, Certified Pre-owned Main Power: 85 to 270 Vac, 47/63 Hz; 2.5 amps. The GP40 power supply is main voltage auto-sensing and requires no manual adjustment. Fuse Requirements: Two 3.15 amp fast-blow IEC127 fuses Environmental: Operating Temperature: 10 °C to 50 °C (50 °F to 104 °F) Operating Humidity: 5 to 95% relative humidity (non-condensing) Eluent Selection: Four different mobile phase components; each can be proportioned from 0-100% Pump: Dual-piston, variable speed, 100 µL (standard bore), 25 µL (microbore) stroke, user-selectable constant pressure or constant flow feedback control Flow Rate Standard bore pump head: 0.04 to 10.0 mL/min, linearly variable in increments of 0.01 mL/min Microbore pump head: 0.01 to 2.50 mL/min, linearly variable in increments of 0.01 mL/min Operating Pressure: 35 MPa (5000 psi) maximum Pressure Resolution: 0.07 MPa (10 psi) High Pressure Limit: 0 to 35 MPa (0-5000 psi) in increments of 0.05 MPa (7.25 psi); trips instantaneously Low Pressure Limit: 0. to 35 MPa (0 to 5000 psi) in increments of 0.05 MPa (7.25 psi); trips after a time-out of 0.4 mL for the standard bore GP40 or 0.1 mL for the microbore GP40 Display: Liquid crystal with adjustable backlighting. Keypad: 26-button pad for entering commands and numerical values for screen parameters. Dimensions (H x W x D): 33.5 x 22.5 x 42 cm (13.1 x 8.9 x 16.8 in) 6 cm clearance required behind the module Weight : 19 kg (42 lbs)
Features
Refurbished to meet manufacturer's specification In excellent condition Thoroughly cleaned Money back guarantee Certified with warranty