DN-48A Nitrogen Blower, Room Temperature~150°C, BiLon (CAT#: STEM-GLE-4100-LGZ)

It uses an internationally recognized technique to concentrate the sample by blowing nitrogen gas into the surface of the heated sample. The method has the characteristics of time-saving, convenient operation, easy control, etc., and the expected results can be obtained quickly. This technology uses solid-phase extraction pretreatment technology instead of traditional liquid-phase extraction and chromatography technology, so that samples can be quickly separated and purified. The nitrogen blowing instrument is used instead of the commonly used rotary evaporator for concentration, which greatly shortens the analysis time.

Heating method: dry aluminum block heating
Temperature control range: room temperature~150°C
Temperature fluctuation: ±0.5°C
Heating power: 900W
Sample position: 48
Gas flow control valve: 48
Heating module aperture: ∮16X45mm
Gas flow: 0-15L/min
Purge module height adjustment: 0--150 mm
Timing range: 59m59s

1. DN series dry nitrogen blower has a variety of heating options, including different number of holes and different pore diameters.
2. The ultra-thick heating block of 70mm makes the overall temperature of the heating block more uniform and accurate, and the temperature of the heating block will also be directly detected by the sensor.
3. The heating module is surrounded by polymer thermal insulation material to avoid burns.
4. The purge needle is removable for easy cleaning.
5. The gas flow of each station can be adjusted individually.
6. With timing function.

ST-24 Water Bath Nitrogen Blower, Process 24 Samples, Shanghai Huxi Industrial Company Limited(CAT#-STEM-GLE-4090-LGZ)
ST-36 Water Bath Nitrogen Blower, Process 36 Samples, Shanghai Huxi Industrial Company Limited(CAT#-STEM-GLE-4091-LGZ)
ST-48 Water Bath Nitrogen Blower, Process 48 Samples, Shanghai Huxi Industrial Company Limited(CAT#-STEM-GLE-4092-LGZ)
DC150-1B Visual Nitrogen Blower, +5°C ~150°C, YOONING(CAT#-STEM-GLE-4093-LGZ)
DC150-1A Pore Nitrogen Blower, +5°C ~150°C, YOONING(CAT#-STEM-GLE-4094-LGZ)
DC150-2 Dry Nitrogen Blower, 2 pieces, YOONING(CAT#-STEM-GLE-4095-LGZ)