Fluke 5520A High Performance Multi-Product Calibrator In Rocklin, CA, USA, Fluke general laboratory equipment (CAT#: STEM-GLEPO-1008-YJL)

Fluke 5520A High Performance Multi-Product Calibrator In Rocklin, CA, USA, model Fluke 5520A is manufactured by Fluke general laboratory equipment.
The Fluke 5520A Multi-Product Calibrator sources direct voltage and current, alternating voltage and current with multiple waveforms and harmonics, two simultaneous voltage outputs or voltage and current to simulate dc and ac power with phase control, resistance, capacitance, thermocouples and RTDs. The Fluke 5520A can also measure thermocouple temperature, humidity (with probe) and pressure using one of 28 Fluke Calibration 700 Series pressure modules. Three options add the capability to calibrate oscilloscopes up to 1.1 GHz. And the Fluke 5520A-PQ Power Quality Option enables the Fluke 5520A to calibrate power quality instrumentation to the standards of the IEC and other regulatory agencies.
Though it can do a lot, the Fluke 5520A is simple to use. Its front panel is logically arranged and clearly labeled. And its bright LCD displays provide all the information you need at a glance. The 5520A is so intuitively easy to use, you'll seldom need to consult the manual.

Condition: Used
Warm up Time: Twice the time since last warmed up, to a maximum of 30 minutes
Settling Time: Less than 5 seconds for all functions and ranges except as noted
Standard Interfaces: IEEE-488 (GPIB), RS-232
Temperature Performance
Operating: 0°C to 50°C
Calibration (tcal): 15°C to 35°C
Storage: -20°C to 70°C
Temperature Coefficient: Temperature coefficient for temperatures outside tcal ± 5°C is 10% of the 90-day specification (or 1-year, as applicable) per °C
Relative Humidity: Operating: <80% to 30°C, <70% to 40°C, <40% to 50°C
Storage:<95%, non-condensing
Altitude: Operating: 3,050m (10,000 ft) maximum
Non-operating: 12,200m (40,000 ft) maximum
Safety: 12,200m (40,000 ft) maximum
Analog Low Isolation: 20V
EMC: Designed to comply with IEC 61326-1/1997
Line Power: Line Voltage (selectable): 100V, 120V, 220V, 240V
Line Frequency: 47 to 63 Hz
Line Voltage Variation: +10% about line voltage setting
Power Consumption: 600 VA
Dimensions: Height: 17.8 cm (7 in), standard rack increment, plus 1.5 cm (0.6 in) for feet on bottom of unit
Width: 43.2 cm (17 in), standard rack width
Depth: 47.3 cm (18.6 in) overall
Weight (without options): 22 kg (49 lbs.)
Absolute Uncertainty Definition: 5500A and 5520A uncertainty specifications include stability, temperature coefficient, linearity, line and load regulation, and the traceability of the external standards used for calibration. You do not need to add anything to determine the total uncertainty of your calibrator for the temperature range indicated.
Specification Confidence Interval: > 99%

11 Calibrations in One - Calibrate the widest range of today's electronic test tools with a single instrument.
Lower output uncertainties to meet the requirements of 5.5 and 6.5 digit multimeters.
Phase lock to simplify timulation of three-phase power.
Current output expanded to 20A and verify current clamps to 1000A using additional attachments.
Improved phase and frequency accuracy and the capability to reference the 5520A to an external 10 MHz frequency standard to support calibrating frequency counters.
Bright, backlit LCD display makes it easy to read from all angles and under a variety of light conditions.

Fluke DTX-1800 w/ 2x DTX-SFM2,2x DTX-MFM2,2x DTX-PLA002,2x DTX-CHA002 (CAT#: STEM-GLEPO-1009-YJL)
Fluke TiR32 In Orlando, FL, USA (CAT#: STEM-GLEPO-1010-YJL)
Fluke TiR29 In Orlando, FL, USA (CAT#: STEM-GLEPO-1011-YJL)
Fluke Calibration 4180 In Rochester, NY, USA (CAT#: STEM-GLEPO-1016-YJL)
Fluke Calibration 7103 In Rochester, NY, USA (CAT#: STEM-GLEPO-1017-YJL)
Fluke Biomedical ESA620 In Rochester, NY, USA (CAT#: STEM-GLEPO-1018-YJL)