Fluke MDA-550 In Rochester, NY, USA, Fluke general analytical equipment (CAT#: STEM-GLEPO-0936-YJL)

Fluke MDA-550 In Rochester, NY, USA, model MDA-550 is manufactured by Fluke general analytical equipment.
The MDA 550 Motor-Drive Analyzers save time and eliminate the hassle of setting up complex measurements, while simplifying the troubleshooting process for variable frequency drives. Simply select a test and the step-by-step guided measurements show you where to make voltage and current connections, while the preset measurement profiles ensure you will capture all the data you need for each critical motor-drive section—from the input to the output, the DC bus, and the motor itself. From basic to advanced measurements, the MDA-500 Series has you covered, and with a built-in report generator you can quickly and easily generate as-found, and as-left reports with confidence.
The MDA-550 is the ideal portable motor-drive analysis test tools and can help safely locate and troubleshoot typical problems on inverter type motor-drive systems.

Condition: Used
DC voltage (V dc)
Maximum voltage with 10:1 or 100:1 probe: 1000 V
Maximum resolution with 10:1 or 100:1 probe: 1 mV
Full scale reading: 999 counts
Accuracy at 4 s to 10 us/div: ±(3 % + 6 counts)
AC voltage (V ac)
Maximum voltage with 10:1 or 100:1 probe: 1000 V
Maximum resolution with 10:1 or 100:1 probe: 1 mV
Full scale reading: 999 counts
50 Hz: ±(3 % + 10 counts) - 0.6 %
60 Hz: ±(3 % + 10 counts) - 0.4 %
60 Hz to 20 kHz: ±(4 % + 15 counts)
20 kHz to 1 MHz: ±(6 % + 20 counts)
1 MHz to 25 MHz: ±(10 % + 20 counts)

Measures inverter output voltage, DC bus voltage and ripple voltage, harmonics, unbalance
Three powerful test tools in one: Motor-drive analyzer, waveform analyzer and recording data logger all in one
Four input channels for voltage and current signals
Measure key motor-drive parameters including
Voltage, current, DC Bus voltage level and AC ripple, voltage and current unbalance and voltage modulation
Additionally, the MDA-550 measures: harmonics, and motor shaft voltage discharges and is supplied with accessories for those measurements
The MDA-550 also performs perform extended harmonics measurements to identify the effects of low and high order harmonics on your electrical power system.
Conduct guided measurements for motor-drive input, DC bus, drive output, motor input and shaft measurements (MDA-550) with graphical step-by-step voltage and current connection diagrams.
Use simplified measurement setup with preset measurement profiles to automatically trigger data collection based on the chosen test procedure.
Create reports quickly and easily that are perfect for docu

Fluke Analyzer MDA-550-III In Elgin, IL, USA (CAT#: STEM-GLEPO-0937-YJL)
Fluke Analyzer OPTIVIEW PRO GIGABIT In Elgin, IL, USA (CAT#: STEM-GLEPO-0938-YJL)
Fluke Networks DTX-1800 Cat6 Cat6a Analyzer (CAT#: STEM-GLEPO-0940-YJL)
Fluke 271 In New Smyrna Beach, FL, USA (CAT#: STEM-GLEPO-0941-YJL)
Fluke Meter 99 SERIES II In Elgin, IL, USA (CAT#: STEM-GLEPO-0942-YJL)
Fluke Meter 1625-2 KIT In Elgin, IL, USA (CAT#: STEM-GLEPO-0944-YJL)