FMI PIP0CKC Low-Flow Microdispenser Pump, 30 mL/min Maximum, 110 VAC, Cole-Parmer (CAT#: STEM-DS-1041-LC)

The FMI PIP0CKC Low-Flow Microdispenser Pump provided by Cole-Parmer is suitable for pumping viscous liquids up to 500 cp. This complete pump contains synchronous, reversible three-speed drive.

Max Flow Rate (mL/min):30
Min Flow Rate (mL/min):0
Flow Rate (mL/stroke):0.05
Max Pressure (PSI):20
Suction Lift, Wet (in H₂O):180
Suction Lift, Wet (mm of H₂O):4572
Power (VAC):110
Power (Hz):60
Power (amps):0.8
Wetted Materials:Alumina ceramic, Kynar®
Inlet Connection:1/4" OD compression
Outlet Connection:1/4" OD compression
Repeatability:±5%
Accuracy:±1%
Max Temperature (° F):212
Max Temperature (° C):100
Viscosity, Max (cP):500
Duty Cycle Continuous:Yes
Height (in):4
Width (cm):12.7
Length (in):5
Height (cm):10.2
Width (in):5
Length (cm):12.7
CE Regulatory Approval:Yes

There is no valve, eliminating clogging
Dead volume is low
Rotating piston prevents clogging

Gardner Denver 2585C-50 Standard Duty Dry Vacuum Piston Pump, Cole-Parmer (CAT#: STEM-DS-0455-LC)
Ismatec High-Pressure Piston Pump, Cole-Parmer (CAT#: STEM-DS-0989-LC)