GS Model Temperature-Controlled Acid Evaporator/Electric Heating Plate, Special For Digestion Tank Lining. (CAT#: STEM-SPE-0037-TP)

GS type temperature-controlled acid rushing electric hot plate is specially designed for the laboratory. It is a good helper for sample heating digestion, acid steaming, boiling, and acid rushing. It is also an ideal supporting product for analytical instruments such as atomic absorption and atomic fluorescence. It can be used to detect lead, cadmium, chromium, mercury, arsenic, zinc, selenium, manganese and other heavy metal elements and trace elements in food, medicine, dairy products, etc. It can also be used to determine the digestion of heavy metals and trace elements in soil.

Model: GS type
Number of holes and hole diameter requirements: According to the customer's sample size, it can be processed into 12, 16, 20, 24, 36, 42, 54, 63, 72 and other digits and special hole diameter × depth electric heating plate
Heating method: Surrounding electric heating PID digital display
Temperature control range: room temperature -260℃
Temperature control accuracy: ±1℃
Anti-corrosion on the surface of the heating plate: imported Teflon coating
Heating plate material: high quality graphite
Rated voltage: 220V
Continuous working time: ＞48h
Ancillary products: Inner tanks, inner cups, beakers, test tubes, crucibles, digestion tank inner cups, beakers, test tubes, crucibles, digestion tanks, etc Cup, PFA sample dissolution tank, etc.

1. High-quality PFA coating, one-touch clean, no rust, fast heating speed of Teflon anti-corrosion cast aluminum heating plate;
2. Working temperature: It can work continuously for 48 hours from room temperature to 260 °C, and it can be raised to 200 °C in 5-30 minutes (depending on the depth of the hole), and it can be heated to 200 °C within half an hour;
3. It can process a large amount of samples at one time and take a short time. Compared with the general hole-type digester that only relies on the plane heating and radiating facade, it can improve the work efficiency by 50%;
4. Surrounding heating, small temperature difference between holes, uniform heating, easy to use and long life;
5. The board surface and the control box can be made into separate parts, so that the acid mist during the experiment will not corrode the components in the control box, thereby increasing the service life, and multiple samples can be processed at the same time without cross-contamination;
6. Uniform digestion: the bottom of the vessel and the 360° wrapping heating make the sample heating without blind spots, with good stability and uniformity;
7. Time setting function can be added, segmented temperature control, that is, programmed temperature rise.