Condition: Certified Pre-Owned
Safety: Class I
Noise
Radiation: 200-315 nm
Common Electronics: Main processor, remote control, Firmware Boards (FIM, SFW), Fluorescent Indicator module, Externa Contacts, power supplies, communication interfaces
Common Functions: Display handling; Keyboard polling; Remote control input and output; Leak sensing; Option interfacing; Time programming; Method storage; Module configuration; Memory switching; 32 kbyte RAM with battery back-up for parameter storage
Timer: 3 programmable
Signals: Shut down, power on, ready, prepare, start request, start, stop
HP Agilent 1050 Series VWD
Detection Type: Double beam photometer
Noise: < 1.5 x 10 -5 AU peak-to-peak at 254 nm, flowing water at 1 ml/min, 1 second response time (10-90%), standard flow cell
Drift: < 5 x 10 -4 AU/hour at 254 nm after warm-up
Wavelength Range: 190 – 600 nm, settable in 1 nm increments
Wavelength Accuracy: ±2 nm
Wavelength Reproducibility: ±0.3 nm
Bandwidth: 6.5 nm
Linear Absorbance Range: Better than 1% up to 1.2 AU using acetone at 265 nm
Response Time: 0.25, 1 or 4 seconds (10-90%); user-selectable
Spectra: Storage of 1 spectrum during run; Scan rate 10 nm/sec; Range from 190 to 600 nm, selectable
Post-run plotting speed from 1 to 50 nm/sec selectable
Plotting of background-corrected spectrum
Light Source: Deuterium lamp from 1090/40/50 DAD
Flow Cells: Standard 14 µl volume, 8 mm pathlength cell with 40 bar (588 psi) pressure maximum; Optional micro, preparative, high-pressure cells are available.
Display: Single line, 16 character fluorescent display with real time display of operating parameters and/or absorbance
Control: Integrated keyboard with function keys; Parameter editing during run possible; Keyboard lock; Optional control by computer or 3396 Series II integrator
Parameters: Wavelength, output range, response time, zero, offset, balance, spectrum acquisition
Diagnostic Aids: Wavelength calibration check with Holmium oxide filter
Time-programs: Time-programmable wavelength and output range
Storage of up to 5 time-programs
Analog Output: One output user-configurable as recorder or integrator. For recorder: 100 mV or 1 V output range from 0.001 to 4 AU, user-selectable; For integrator: 100 mV/2 AU full scale or 1 V/2 AU full scale, user-selectable
Communications: START (input/output), STOP (input/output), READY (output), SHUTDOWN (output) for synchronization with other LC modules.
Safety Aids: Extensive diagnostics, error detection and display via front-panel LED’s. Leak detection, safe leak handling, leak output signal for shutdown pumping system. Low voltages in major maintenance areas.
Environment
Temperature Range: 5 to 55℃
Humidity: < 95% (non-condensing)
Power Requirements
Line voltage: 100-120 or 220-240 VAC ±10%
Line frequency: 48-66 Hz
Power consumption: 150 VA max.
Dimensions
Height: 133 mm ( 5.2 inch)
Width: 325 mm (12.8 inch)
Depth: 545 mm (21.5 inch)
Weight: 14 kg ( 31 lb)