Inline Degasser AF, Waters (CAT#: STEM-CPO-0563-ZJF)

The manufacturer of the Inline Degasser AF, Waters is Waters.
Refurbished Waters Inline Degasser AF (m/n DG2).
The Waters In-line Degasser AF removes dissolved gases from samples, which is a necessary step for obtaining accurate readings in HPLC. It features a zero hysteresis/constant-run vacuum pump with a stepper motor for membrane degassing of HPLC mobile phases.

Condition: Refurbished, Certified Pre-owned
Flow Range: 200µL/min to 5mL/min
Pressure Drop Across One Channel: <0.08 psi (0.55 kPa) at 1 mL/min. Milli-Q water, STP
Eluent Connections: 1/4-28 reversed ferrule fittings
Maximum Pressure: 10 psi
Dimensions: 5.25" W x 12" D x 5.75" H (13.33 x 30.48 x 14.60 cm)
Weight: 7.5 lbs. (3.4 kg)
Power: 115/230VAC (85-132V/187-264V), 50/60Hz, Autosensing
Ambient Temperature: 4-40°C (39-104°F)
Relative Humidity: 10-90%, non-condensing

Lower drift, pressure fluctuation, and baseline noise
Supports up to four independent fluid channels in separate vacuum chambers
Zero hysteresis/constant-run vacuum pump with stepper motor
Cycles between high-speed and low-speed operation to enable rapid vacuum and eluent equilibration

Inline Degasser, Waters
239310 Remote Interface Module, Beckman Coulter
Jasco CO-2060 Plus Column Oven, Jasco