Condition: Used
CRT
Type: 6-inch rectangular type with internal graticule; 0%, 10%, 90% and 100% markers; 8 x 10 DIV (1 DIV = 1 cm)
Phosphor: P31
Accelerating Potential: 12kV approx
Illumination: Continuously adjustable
Z-Axis Input: Input impedance: approx 5kW
Sensitivity: above 3Vpp
Bandwidth: DC ~ 5MHz
Vertical System
Sensitivity: 5mV ~ 5V/DIV ±3%; 1mV ~ 2mV/DIV ±5%
Bandwidth: DC ~ 50MHz
DC ~ 15MHz at 1mV ~ 2mV/DIV
Rise Time: 7ns (23.3ns at 1mV ~ 2mV/DIV)
Signal Delay: Leading edge can be monitored
Input Impedance: 1MW approx
Input Coupling: AC, DC, GND
Vertical Mode: CH1, CH2, DUAL (automatic switching CHOP and ALT), CH2 INV, ADD
Horizontal System
A (Main) Sweep Time: 0.1µs ~ 0.5s/DIV ±3%, 100ns ~ 50ms/DIV ±5% (x 10 MAG), 10ns ~ 50ns/DIV ±8% (x 10 MAG)
B (Delay) Sweep Time: 0.1µs ~ 0.5ms/DIV ±3%, 100ns ~ 50µs/DIV ±5% (x 10 MAG), 10ns ~ 50ns/DIV ±8% (x 10 MAG)
Delay Time: 1µs ~ 5ms ±5%
Delay Time Jitter: Better than 1:10000
Trigger
Trigger Mode: AUTO, NORM, SINGLE
Trigger Source: CH1, CH2, ALT, LINE, EXT
Trigger Coupling: AC, DC, HF REJ, TV
Trigger Slope: "+" or "-"
X-Y Operation
Sensitivity: 5mV ~ 5V/DIV ±4%
X-Axis Bandwidth: DC ~ 2MHz
Phase Error: 3º or less from DC ~ 100kHz
Output Signal
Trigger Signal Output: Voltage: approx 25mV/DIV into 50W
Calibrator Output: 1kHz square wave, 2Vpp ±2%
Cursor Readout Function
Cursor Measurement Function: 7 functions: DV, DV%, DVdB, DT, 1/DT, DUTY, Dq
Cursor Resolution: 1/25 DIV
Panel Setting Display: Vertical: V/DIV, V-MODE, CHOP/ALT, ADD (SUB), INV, UNCAL, probe factor (x 1 / x 10)
Horizontal: S/DIV (MTB, DTB), UNCAL, MAG (x 10)
Other: TV-V/TV-H, X-Y
Effective Cursor Range: Vertical: ±3 DIV; Horizontal: ±4 DIV
Other Details
Power Source: AC 100V/120V/230V ±10%, 50/60Hz
Accessories: Power cord x 1, Instruction manual x 1, Probe (10:1/1:1) x 2
Dimensions: 310mm (w) x 150mm (h) x 455mm (d)
Weight: 8.2kg approx