Lab-Line Hybridization Incubator, Lab-Line Instruments Inc (CAT#: STEM-CCPO-0159-ZJF)

The manufacturer of the Lab-Line Hybridization Incubator is Lab-Line Instruments Inc.
The pre-owned products will be thoroughly cleaned and fully tested to perform at manufacturer specifications before shipping.

Condition: Certified Pre-Owned
Precise microprocessor-based PID temperature control from 7°C above ambient to 85°C with 0.1°C resolution.
Forced-air circulation maintains excellent temperature uniformity of ±0.5°C at 55°C in chamber or ±0.25°C sample to sample.
Heat up time is ambient to 65°C within less than 20 minutes.
Recovery time at 37°C with door opened 30 seconds is less than 2 minutes.
Variable speed control from less than 5 to 15 rpm within ±1 rpm for uniform distribution of solutions and complete wetting of membrane.
All models are supplied with a carousel that accommodates tubes ranging in size from 35mm ID x 100mm to 300mm long.
Carousel is equipped with Gentle-Clip tube grips that hold tubes securely, yet are easy to open for easy loading and unloading.
Dual chamber includes two carousels.

Uniform temperature and controlled environment
In excellent condition
Thoroughly cleaned
Fully tested to perform at manufacturer specifications

Cole-Parmer StableTemp Hybridization Incubator, 7 °C Above Ambient to 85 °C, Cole-Parmer
Fisher Biotech Hybridization Incubator, Thermo Fisher Scientific
Infors HT Triple Stack Incubator Shaker, Infors HT
Infors HT Triple Stack Incubator Shaker, Infors HT