Unlock Exclusive Discounts & Flash Sales! Click Here to Join the Deals on Every Wednesday!

Licor Odyssey CLx Imaging System, LI-COR Biosciences (CAT#: STEM-GLEPO-1400-ZJF)

Highlights

Fully re-furbished, calibrated and aligned to manufacturer standrad
In excellent condition
Thoroughly cleaned

Cat Number: STEM-GLEPO-1400-ZJF

Application: Give your lab clear sharp digital results in as little as 6 minutes

Model: Odyssey CLx

Add to Cart



Description

The Licor Odyssey CLx Imaging System is manufactured by LI-COR Biosciences.
The Odyssey CLx Infrared Imaging System contains two lasers; one emitting at 785 nm, and one at 685 nm. The 685 nm laser emits visible laser radiation – direct exposure to either beam may cause eye damage. Laser radiation is emitted through apertures at the top of the Odyssey CLx microscope assembly. Because the microscope assembly moves in both planes relative to the glass scanning surface, laser radiation could be focused at any position on this surface. Safety interlocks (described below) automatically turn the lasers off when the Odyssey CLx lid is opened.
The Odyssey CLx is the next generation of the Odyssey Classic, the most trusted and established standard in quantitative Western blot technology. The most flexible and multifunctional platform of the Odyssey imaging systems which accommodates a wide variety of applications and has the largest imaging surface of all Odyssey imaging systems (25 cm x 25 cm), accommodating up to six microtiter plates.

Specification

Condition: Certified pre-owned
Laser/Microscope
Image Field Size: 25 cm × 25 cm
Dynamic Range: 4 logs (Manual); >6 logs (Auto)
Laser Lifetime: 40,000 hours typical
700 Channel Laser Source: Solid-state diode laser at 685 nm
800 Channel Laser Source: Solid-state diode laser at 785 nm
Detectors: Silicon avalanche photodiodes
Scanning Speed: 5 – 40 cm/s
Resolution: 21 – 337 µm
Focusing Range: This microscope is adjustable 0 mm – 4 mm above the scan bed to obtain the best signal-to-noise ratio
Operation Specifications
Operating Conditions: 15-35 °C and dew point no greater than 20 °C
Power Requirements: Universal input range is between 100-240 VAC (voltage fluctuations not to exceed 10% of the nominal voltage); 4 Amp maximum; at 120V, 0.5 Amp typical when idle; 50/60 Hz.
Dimensions: 22x25x15″ (29" of clearance needed to open the hood.)
Weight: 70 lbs

Features

Fully re-furbished, calibrated and aligned to manufacturer standrad
In excellent condition
Thoroughly cleaned
Certified with warranty

Related Products

Amersham Typhoon 5 (Current Model) Imaging System, Molecular Dynamics
Licor Odyssey CLx Imaging System, LI-COR Biosciences
Licor Odyssey Infrared Imaging System, LI-COR Biosciences
Advertisement