Microcomputer Controlled Large Capacity Refrigerated Centrifuge, 6000r/min, Dimensions 730×840×1200mm (CAT#: STEM-LC-0110-LGH)

Acceleration/deceleration time gears can be set according to customer needs, with 9 gears for acceleration and 10 gears for deceleration.
Touch panel, digital display.
The use of environmentally friendly refrigerants meets environmental protection requirements. The temperature setting range is -20 °C ~ 40 °C, and the maximum speed can still be kept below -4 °C.
Automatic monitoring of unbalance, overspeed, overtemperature, door lock and other protections.
Adopt carbon brushless, variable frequency motor, no worries.
The fuselage is made of all-steel structure, with three layers of protection, which is safe and reliable.
Low vibration, quiet operation, and noise below 65 decibels.
The rotor and centrifugal cup are made of 7075-T6 aviation-grade forged aluminum alloy, which is hard-oxidized and corrosion-resistant. Every process from raw materials, processing to finished products is strictly controlled; material certification, flaw detection test report, tensile test report, chemical composition test Reports, processing inspection reports have original records.

Maximum speed: angle rotor 6000r/min, horizontal rotor 4200r/min
Maximum relative centrifugal force Angle rotor 6680×g, horizontal rotor 5100×g
Maximum capacity: angle rotor 6×500ml, horizontal rotor 6×1000ml
Speed accuracy: ±10r/min
Speed range: 100rpm~maximum speed, step 100
Timing range: 1min～99h59min
Timing Mode: To Tachometer
Acceleration/deceleration curve: 9 gears up, 10 gears down
Temperature setting range: -20℃～40℃ (1℃ adjustable)
Pre-cooling: No
Temperature control accuracy: ±2℃
Compressor unit: Imported high-performance compressor unit, environmentally friendly refrigerant R404a
Drive system: high torque brushless motor
Overall noise: ≤ 65dB(A)
Switchboard power: 3.0kW
Power supply: AC220V±22V 50Hz
Dimensions: 730×840×1200mm(L×W×H)
Outer size: 920×1040×1520mm(L×W×H)
Weight: 260kg

Acceleration/deceleration time gears can be set according to customer needs, with 9 gears for acceleration and 10 gears for deceleration.
Touch panel, digital display.
The use of environmentally friendly refrigerants meets environmental protection requirements. The temperature setting range is -20 °C ~ 40 °C, and the maximum speed can still be kept below -4 °C.
Automatic monitoring of unbalance, overspeed, overtemperature, door lock and other protections.
Adopt carbon brushless, variable frequency motor, no worries.
The fuselage is made of all-steel structure, with three layers of protection, which is safe and reliable.
Low vibration, quiet operation, and noise below 65 decibels.
The rotor and centrifugal cup are made of 7075-T6 aviation-grade forged aluminum alloy, which is hard-oxidized and corrosion-resistant. Every process from raw materials, processing to finished products is strictly controlled; material certification, flaw detection test report, tensile test report, chemical composition test Reports, processing inspection reports have original records.