Millipore K-Prime 40-III Biochromatography System, Millipore (CAT#: STEM-CPO-0019-ZJF)

The manufacturer of the Millipore K-Prime 40-III Biochromatography System is Millipore.
The Millipore K-Prime 40-III Biochromatography System is designed for separating and purifying proteins and bio-engineered products. The K-Prime 40-III systems is designed to make process scale-up as easy as possible. The K-Prime 40-III system can be configured with a stand alone bubble trap or a bubble trap with a separate filter.
The pre-owned products will be thoroughly cleaned and fully tested to perform at manufacturer specifications before shipping.

Condition: Certified Pre-Owned
Flow Rate (per minute): 1 - 10L
Pressure Rating: Up to 7 Bar (102 psig)
Temperature Range:
Ambient: +2 to 30°C
Flow Stream (temperature range for operating at maximum pressure rating): +2 to 30°C
Process Connection Type: 3/4" sanitary clamp
Pipework Inside Diameter: 10 mm bore
Buffer/Solvent Inlets: Four outlets with gradient capability
Gradient Capability:
Two component buffer Isocratic or linear mix; six binary mix combinations
Mix Range: 10 - 90%
Accuracy: ± 2% FS of either buffer
Reproducibility: ± 1%
Hold-up Volume:
Buffer to Waste: 1.45L
Sample to Column: 1.2L
Bubble Trap (full): 2.0L
Humidity: 5 - 95% (non-condensing)

In excellent condition
Thoroughly cleaned
Fully tested to perform at manufacturer specifications

Bio-Rad BioLogic LP Liquid Chromatograph, Bio-Rad
Isco BioOptix10 Protein Chromatography System, Teledyne Isco
Unused Repligen ARTeSYN 1/4 Inch Single-Use Chromatography System, Repligen
GE AKTAprocess Chromatography Skid, GE Healthcare Life Sciences
Bio-Rad NGC Chromatography System, Bio-Rad
Eksigent NanoLC ultra System, Eksigent Technologies