NI SCB-68 Terminal Block, National Instruments (CAT#: STEM-CPO-0599-ZJF)

The manufacturer of the NI SCB-68 Terminal Block, National Instruments is National Instruments.
The National Instruments NI SCB-68 Terminal Block is a shielded I/O connector block for interfacing I/O signals to plug-in data acquisition (DAQ) devices with 68-pin connectors. Combined with the shielded cables, the SCB-68 provides rugged, very low-noise signal termination. It is compatible with single- and dual-connector NI X Series and M Series devices with 68-pin connectors. The connector block is also compatible with most NI E, B, S, and R Series DAQ devices.

Condition: Refurbished, Certified Pre-owned
Temperature Sensor Accuracy: ±1.0 °C over a 0 to 70 °C range
Power: 5 VDC, ±5%; 1 mA with no signal conditioning installed; 800 mA max from host computer
Fuse Rating: 1.10 A, 8 VDC SMT PTC, fuse is not user-replaceable
Dimensions: 5.8" W x 5.8" D x 1.2" H (14.7 × 14.7 × 3.0 cm)
Weight: 1.41 lb (0.64 kg)
I/O connector: 68-pin male SCSI connector
Screw terminals: 68, all I/O signals are available at screw terminals
Wire gauge: 14–30 AWG
Operating Temperature: 0 to 70°C
Storage Temperature: –20 to 70°C
Relative humidity, operating: 5 to 90% RH, noncondensing
Relative humidity, storage: 5 to 90% RH, noncondensing
Pollution Degree: 2
Maximum altitude: 6562 ft (2,000 m)

Refurbished to meet manufacturer's specification
In excellent condition
Thoroughly cleaned
Money back guarantee
Certified with warranty

New Nexera XR UHPLC System, Shimadzu
OptionBox-L, Shimadzu
OptionBox-S, Shimadzu