The manufacturer of the Series 200 Vacuum Degasser, Perkin Elmer is Perkin Elmer. Refurbished Perkin Elmer Series 200 Vacuum Degasser. 5-channel and 3-channel options available. (available part numbers: N2600531, N2600521 & N2600530)
Specification
Condition: Refurbished, Certified Pre-owned Channels: 1-5 independent Degassing Process: Gas permeation through a fluoropolymer membrane Maximum Recommended Flow Rate: 3.0 mL/min. Pressure Drop: 1.37 mm Hg/mL/min. Degassing Capacity: ~25% dissolved gases remaining in 60: 40 MeOH/Water mixture at 1 mL/min. Dead Volume: ~480 microliters per channel for standard channel Materials contacting solvents: PEEK, Glass-filled PTFE, Teflon AF Power: Power requirement if using supplied AC Adapter: 100 to 240 VAC (±10%), 1A, 50 to 60 Hz (±3 Hz) Power Requirement if not using supplied AC Adapter: 15 to 24 VDC at 0.85 A maximum (0.5 A typical) Wall Sockets: 4 supplied with AC Adapter, interchangeable: North America/Japan, U.K., Continental Europe, Australia Installation Over-Voltage Category: II Validation Output: Signal: 5 mVDC / 1 mm Hg absolute from 20 to 800 mm Hg (0.100 VDC at 20 mm Hg; 4.000 VDC at 800 mm Hg) Accuracy: ±1.0% of reading ±0.010 VDC from 20 to 800 mm Hg Operating Conditions: Ambient Temperature: 10 to 35 ºC Ambient Relative Humidity (RH): 20 to 80 % RH (without condensation) Altitude: 0 to 2000 Meters Indoor vs. Outdoor Use: Indoor Pollution Degree: 2 Storage Conditions: Ambient temperature: -20 to +60 ºC Ambient Relative Humidity: 20 to 80% RH (without condensation) Altitude: 0 to 12000 M
Features
Refurbished to meet manufacturer's specification In excellent condition Thoroughly cleaned Money back guarantee Certified with warranty