SPX Type Light Incubator, Dimensions 75.5x95.5x184cm, 2500W

Description

Personalized structure design: The inner tank is mirror stainless steel, the clean and hygienic box is sprayed with cold-rolled steel plate, beautiful and practical, the position of the partition can be easily adjusted, and the auxiliary light-touch adjustment switch without any tools, light and flexible magnetic door seal, switch Convenience and good sealing performance The outer door and both sides are equipped with special glass with good heat preservation and light transmittance, which can effectively isolate the heat generated by sunlight and maximize light transmittance. The internal temperature has no effect and can be operated for a long time
Airflow: Forced convection, more uniform culture environment
Safety function: With over-temperature protection and temperature sensor open-circuit or short-circuit protection function, automatic power-off protection when abnormality occurs, and alarming, parameter memory function when power-off or crash, automatic recovery of incoming calls
Fluorine-free environmentally friendly refrigerant, high efficiency and low consumption

Specification

Dimensions (cm): 75.5x95.5x184
Studio size (cm): 56x60x120
Packing case size (cm): 105x87x204
Nominal volume (L): 400
Net weight/gross weight (kg): 150/200
Partition board (block): 3
Rated power (W): 2500
Temperature control range: light: 10~50℃; No light: 5~50℃
Temperature fluctuation: ±1.5℃
Temperature uniformity: ±2℃
Illuminance: 6000LX; Six levels of controllable
Refrigerant: R134a (fluorine-free environmental refrigerant)
Power supply: 220V±10%; 50Hz
Working environment temperature: 5~35℃
Working hours: continuous

Features

Personalized structure design: The inner tank is mirror stainless steel, the clean and hygienic box is sprayed with cold-rolled steel plate, beautiful and practical, the position of the partition can be easily adjusted, and the auxiliary light-touch adjustment switch without any tools, light and flexible magnetic door seal, switch Convenience and good sealing performance The outer door and both sides are equipped with special glass with good heat preservation and light transmittance, which can effectively isolate the heat generated by sunlight and maximize light transmittance. The internal temperature has no effect and can be operated for a long time
Airflow: Forced convection, more uniform culture environment
Safety function: With over-temperature protection and temperature sensor open-circuit or short-circuit protection function, automatic power-off protection when abnormality occurs, and alarming, parameter memory function when power-off or crash, automatic recovery of incoming calls
Fluorine-free environmentally friendly refrigerant, high efficiency and low consumption

Other recommended products

VorTemp 56 Shaking Incubator, 56 x 1.5/2.0 ml Tubes; 4 Standard or 2 Deep Well Microplates, Labnet International (CAT#: STEM-LE-0162-LC)
In-VitroCell ES Humidity & Zirconia Oxygen Control CO2 Incubators,7 ft³ or 200 L, NuAire (CAT#: STEM-LE-0739-LC)
Shinetek Multitron 95℃ Multifunctional High Temperature Shaking Incubator, 20-400 RPM, Shinetek Instruments Research Institute (CAT#: STEM-CC-3310-LGZ)
HH.CP Incubator-CO2, RT+5~50℃, 160L, Shanghai Huitai Equipment Manufacturing Co., Ltd (CAT#: STEM-CC-0114-YJL)
NuAire Direct Heat CO2 Incubator NU-5800 Series, 200L, NU-5841, Techcomp Group (CAT#: STEM-CC-0275-YJL)
Forma™ Environmental Chambers, 11 cu.ft (311.5 L) or 29 cu.ft. (821.2 L), Thermo Fisher Scientific (CAT#: STEM-LE-1550-LC)
HDPF Type Upgraded Electric Heating Constant Temperature Incubator, Dimensions 80x77x120cm, 700W (CAT#: STEM-GLE-1151-LGH)
Modular Incubator Chamber (MIC-101), Height 12 cm, Billups-Rothenberg Inc. (CAT#: STEM-LE-1674-Y)

SPX Type Light Incubator, Dimensions 75.5x95.5x184cm, 2500W (CAT#: STEM-GLE-1080-LGH)

Highlights

Description

Specification

Features

Other recommended products