Thermo Scientific A84600061 Water Bath, Thermo Fisher Scientific (CAT#: STEM-GLE-2311-LGZ)

The manufacturer of Thermo Scientific A84600061 Water Bath is Thermo Fisher Scientific. Model is A84600061. Before lifting wax or resin sections onto microscope slides, keep water at constant temperature to flatten them. In addition to corrosive substances, it is also used for heat dyeing.

Condition: used
Model: A84600061
Thermo Scientific A84600061 Water Bath

1. The unit on the top edge has a lot of room to dry the slides.
2. Controls are embedded to provide an additional security measure.
3. The deep conical bowl is made of stainless steel, which can provide maximum corrosion resistance.
4. The upper sleeve and bowl are coated with matte black PTFE for visual contrast to the wax part.
5. The lower steel casing has an epoxy resistant coating.
6. Power cables have molded connections at both ends.
7. The power socket at the rear of the unit has fuses, on the negative and positive wires, which can provide the best protection.

Benchmark Scientific SB0012 Water Bath, Benchmark Scientific(CAT#-STEM-GLE-2344-LGZ)
Benchmark Scientific Shaking Water Bath 12L Shaking Waterbath, Benchmark Scientific(CAT#-STEM-GLE-2345-LGZ)
Julabo TW20 Water Bath, Julabo(CAT#-STEM-GLE-2346-LGZ)
PolyScience WB02 General Purpose Water Bath, PolyScience(CAT#-STEM-GLE-2347-LGZ)
VWR WB10 Water Bath, Avantor(CAT#-STEM-GLE-2348-LGZ)
VWR 1136 Heated / General Purpose Waterbath, Avantor(CAT#-STEM-GLE-2351-LGZ)