1047A Refractive Index (RI) Detector, Hewlett Packard (CAT#: STEM-CPO-0322-ZJF)

The manufacturer of the 1047A Refractive Index (RI) Detector, Hewlett Packard is Hewlett Packard.

Condition: Refurbished, Certified Pre-owned
Signals:
RI range 1 to 1.75; measurement range
1/64 x 10 -5 DELTA RIU to 32 x 10 -5 DELTA RIU (full scale).
Noise: < ± 2.5 x 10 -9 DELTA RIU peak-to-peak, flowing water at 1 ml/min, 0.8 second response time (10-90%)
Wander: < ± 1 x 10 -8 DELTA RIU
Drift: < 2.5 x 10 -7 DELTA RIU/hour, after warm-up.
Response Time: 0.3, 0.8, or 5 seconds (10-90%).
Flow Cell: 7 µl volume with 7 bar (103 psi) maximum pressure
Recommended pH range: 2.3 to 9.5 standard. Solvents with a pH between 1.0 and 2.3 must not contain acids which attack stainless steel.
Temperature Control: 30, 35, 40, 45, 50°C.
Display: Single line, 4 1/2 digit display with real time display of output voltage (recorder or integrator
Analog Outputs: One output integrator output 2 V maximum (32 mV/10 -5 DELTA RIU); two recorder outputs (0-1 mV and 0-10 mV).
Communications: Four control inputs (marker, flush, balance not ready)
Environment: Temperature range: 0 to 40°C
Humidity: < 85% (non-condensing)
Power Requirements:
Line voltage: 100, 120, 220, 240 V AC (+5%, -10%)Line frequency: 48-66 Hz
Power consumption: 120 VA (410 BTU/hour)

Refurbished to meet manufacturer's specification
In excellent condition
Thoroughly cleaned
Money back guarantee
Certified with warranty

Varian CP-3800 GC Gas Chromatograph, Varian
1090L LC System, Agilent Technologies/HP
10A HPLC System, Shimadzu