2019 Beckman Coulter CytoFLEX S, 100-240V In Woonsocket, RI, USA (CAT#: STEM-CAPO-0018-YJL)

2019 Beckman Coulter CytoFLEX S, 100-240V In Woonsocket, RI, USA, model CytoFLEX S, is manufactured by Beckman - Coulter biotechnology & life science.
The CytoFLEX S Flow Cytometer series is an expansion of the CytoFLEX Platform. This model expands research possibilities, with a fourth laser option, multiple configurations and unique filter sets that allows investigators to focus on the science, not the instrumentation.
Used Beckman Coulter CytoFlex S Flow Cytometer for sale.

Condition: Used
Approximate acceleration time: 10 acceleration profiles–9 slow rates or maximum acceleration from 0 to set speed
Approximate deceleration time: 11 deceleration profiles–9 slow rates, coasting to a stop without brake, or full dynamic braking from set speed
Electrical requirements: 50 Hz, 220-240 VAC
Imbalance tolerance: ±5 ml or 10%, whichever is greater
Maximum heat dissipation into room under steady-state conditions: 1.0 kW (3,400 Btu/hr)
Noise level 1 meter in front of centrifuge: < 53 dBA
Set speed: Actual rotor speed ± 10 rpm of set speed after equilibration (above 1,000 rpm)
Set temperature: 0 to 40°C in 1°C increments
Set time: To 999 hr 59 min; Hold for continuous runs
Speed range: 1,000 to 80,000 rpm
Temperature control: ± 0.3°C of set temperature (after equilibration)
Ambient temperature range: 10 to 40°C ambient
Clearances required: 5.1 cm (2.0 in) sides; 15.2 cm (6.0 in) rear
Humidity restrictions: < 95% (noncondensing)
Pollution degree: 2
Time — actual display: Indicates time remaining in timed runs, time elapsed in Hold runs, or estimated time remaining in ?2t runs
Vacuum: Below 5 microns (0.7 Pa)
Finish: Control panel: coated polycarbonate. Top surface: urethane paint. Other surfaces: general purpose paint.
Installation category: Category II
Display: Shows the accumulated ?2t to two significant digits (in exponential notation)
Top surface: Urethane paint
Keypad material: Coated polycarbonate
Manual operation: Indicates time remaining in timed runs, time elapsed in Hold runs, or estimated time remaining in Ω2t runs
Set w²t: Up to 9.99 × 10^14 radians squared per second
Temperature display: Actual rotor temperature in 0.1°C increments
Category: Laboratory Centrifuges in USA
Subcategory: Centrifuges
Subcategory 2: Laboratory instrumentation
Subcategory 3: Ultracentrifuge centrifuges
Listing ID: 44531858

Exquisite Sensitivity
Unique collection of innovative technologies provide exceptional detection capabilities
Large dynamic range to resolve dim and bright populations in the same sample
Use violet side scatter to detect nanoparticles
Platform Versatility
Purchase the number of parameters needed now
Add more parameters by purchasing an activation key
Includes full complement of repositionable bandpass filters, non-standard filters also available for even more flexibility
Low Maintenance
Lasers, steering optics and flow cell are all mounted onto a vibration isolated table, maintaining optical alignment
Low pressure fluidics system
Preventive Maintenance can be completed by the user, no service visit required
Automation Enabled
Optional 96-well plate sample loader module
API (Application Programming Interface) allows external software to control the instrument
For automated sample processing and data acquisition integrate with the Biomek i-Series Instrument

Beckman Coulter Cytomics FC500 MPL Flow Cytometry Analyzer In Elkin, NC, USA (CAT#: STEM-CAPO-0011-YJL)
BECKMAN/COULTER FC-500 MCL FLOW CYTOMETER, 110V or 220V In Temecula, CA, USA (CAT#: STEM-CAPO-0012-YJL)
Beckman Coulter Cell Lab Quanta SC Flow Cytometer, 771917 Laser, Arc, MPL (3390) In Goleta, CA, USA (CAT#: STEM-CAPO-0013-YJL)
Beckman Coulter Epics MCL 4 Color Flow Cytometry Analyzer, 300nm – 800nm In Ramsey, MN, USA (CAT#: STEM-CAPO-0014-YJL)
Beckman Coulter Epics XL MCL 5 Color Flow Cytometry Analyzer, 100 tests/hour In Ramsey, MN, USA (CAT#: STEM-CAPO-0016-YJL)
2017 Beckman Coulter B90883 In Woonsocket, RI, USA (CAT#: STEM-CAPO-0017-YJL)