DASGIP® Parallel Bioreactor System for microbial applications, max. 250 sL/h gassing, for 8 single-use vessels, Eppendorf (CAT#: AM-AUTO-0372-LY)

The DASGIP® Parallel Bioreactor System for microbial applications, max. 250 sL/h gassing, for 8 single-use vessels is manufactured by Eppendorf. The DASGIP parallel bioreactor system is used for cell culture and microbiology R & D and process development, allowing advanced biological process control and automation. Parallel processing, precise control of all relevant parameters, user-defined profiles and countless automation features have led to fast and efficient process development. DASware software solutions support DoE, process historians, and comprehensive data management. Configurable solutions address the unique requirements of microbial, phototrophic, mammalian and human cells, stem cell applications, and biofuel and biopolymer processes.

Number of parallel units: Up to 16
Software: DASware control, other DASware optional
User Interface: Process computer with monitor
Typical power consumption (4-fold system without process computer): 541 W (at 230 V)/467 W (at 115 V) (639 W/584 W without DASGIP Bioblock)
Dimensions (W × D × H, 4-fold system without process computer): 140 x 70 x 53 cm (55 x 28 x 21 in)
Typical weight (4-fold system without accessories): 96 kg (78 kg without DASGIP Bioblock)
Vessels: Glass/single-use vessels
Sterilization: Autoclavable/pre-sterilized
Total volume: 1.3 L to 4.3 L
Drive: Direct/magnetic overhead drive
Speed ranges: 100 – 1,600 rpm (standard)/30 – 1,250 rpm (optional)
Impellers: Rushton-type
Gas supply: TMFC/Rotameter; sparger
Standard gas flow rates: 0.5 – 250 sL/h, 0.5 – 150 sL/h CO2(DASGIP MX4/4H, other modules available)
Standard gas mixing: Air, N2, O2 and/or CO2
Feed lines per vessel: Up to 8
Standard feed rates (depending on tube diameter): 0.3 – 9.5 mL/h to 13 – 420 mL/h (DASGIP MP8) 10 – 70 mL/h to 0.4 – 5 L/h (DASGIP MP4)
Temperature control: Heat blankets (optional cooling fingers)/ heating and cooling integrated in DASGIP Bioblock (additional cooling fingers optional)
Standard temperature range (at 25° C room temp.): 5 K above cooling agent temperature – 60°C (heat blankets/ 5 K above cooling agent temperature – 99°C (DASGIP Bioblock)
pH control: Acid and/or base, and other set-ups
DO control: Cascade (agitation speed, optional O2 concentration, optional gas flow rate), and other set-ups
ORP (redox) measurement: Optional
Level/foam: Optional
OD measurement: Optional (DASGIP OD4)
Exhaust condensation: Water-cooled or liquid-free (Peltier with DASGIP EGC4)
Exhaust analysis: Optional (DASGIP GA4)