Carbon and hydrogen isotope measurements on atmospheric methane by continuous-flow isotope ratio mass spectrometry (CAT#: STEM-ST-0064-LJX)

Introduction

The service used the continuous-flow isotope ratio mass spectrometry (CF-IRMS) technique for high-precision δD and δ13C measurements of atmospheric methane on 40 mL air samples. CH4 is separated from other air components by utilizing purely physical processes based on temperature, time and mechanical valve switching. Chemical agents are avoided. Trace amounts of interfering compounds can be separated by gas chromatography after pre-concentration of the CH4 sample. The purified sample is then either combusted to CO2 or pyrolyzed to H2 for stable isotope measurement. Apart from connecting samples and refilling liquid nitrogen as coolant the system is fully automated and allows an unobserved, continuous analysis of samples. The analytical system has been used for analysis of air samples with CH4 mixing ratios between ~100 and ~10 000 ppb, for higher mixing ratios samples usually have to be diluted.

Add to Cart Please Inquire

Principle Applications Procedure Materials Notes Related Products

Principle

Isotope ratio mass spectrometry (IRMS) leverages magnetic sector mass spectrometry to enable high-precision measurement of the stable isotope content of a sample. Typical measurements target hydrogen, carbon, nitrogen, and oxygen analyses—although elements with masses up to and including sulfur can be measured. Solid, liquid, or gas phase samples are converted to simple gases then introduced to the IRMS. During analysis, an electron impact source ionizes sample-derived gas which is then accelerated down a flight tube, separated by mass, and quantified using a series of Faraday cups. The high precision of IRMS enables enumeration of even very small isotopic fractionation associated with physical, chemical, and biological transformations or natural abundance measurements.

Applications

For explaining the detailed molecular mechanisms behind biological processes
For understanding and quantifying nutrient and material exchanges between ecosystems
For providing ultra-precise stable isotope analyses
For understanding the geological history of the Earth
For food authenticity, forensic science, medical research and anti-doping testing

Procedure

1. Fill the reaction tube and install it, connect the gas path
2. Check for helium leaks
3. Heat up the reactor, wait for the reaction tube to burn stable, adjust the state of the equipment
4. Wrap the sample in a tin cup and test the sample
5. Store and process data

Materials

• Sample Type:
Atmospheric methane

Notes

1.The approach is also valuable for quantifying the reactivity and progression of an applied stable isotope tracer to help determine reaction rates and final disposition of applied substrates.
2.IRMS offers a way of measuring isotopic variations with extremely high levels of accuracy. It can be used to detect isotope values of lighter elements with no issues, making it instrumental in the analysis of organic and natural samples.

Other recommended products

Studing the earth sciences by isotope ratio mass spectrometry (CAT#: STEM-ST-0031-LJX)
Determination of 2H/1H and 13C/12C isotope ratios of (E)-methyl cinnamate from different sources by isotope ratio mass spectrometry (CAT#: STEM-ST-0029-LJX)
Nitrogen isotope analysis of aqueous ammonium and nitrate by membrane inlet isotope ratio mass spectrometry (MIRMS) at natural abundance levels (CAT#: STEM-ST-0014-LJX)
Discrimination of ammonium nitrate sources by isotope ratio mass spectrometry (IRMS) (CAT#: STEM-ST-0022-LJX)
Detection of Authenticity of Grape Must by Isotope Ratio Mass Spectrometry (CAT#: STEM-ST-0004-LJX)
Characterization of Brazilian coffee by isotope ratio mass spectrometry and supervised chemometrics (CAT#: STEM-ST-0013-LJX)
Stable isotope analysis of fatty acids by gas chromatography–isotope ratio mass spectrometry (CAT#: STEM-ST-0053-LJX)
Desulfurization of black powder for isotopic profiling by isotope ratio mass spectrometry (CAT#: STEM-ST-0001-LJX)