General Purpose AFM Probes, HQ:NSC16/No Al, 190 kHz (45 N/m), MikroMasch (CAT#: STEM-M-0075-LKN)

Cat Number: STEM-M-0075-LKN

Application: The 16 series cantilevers with high spring constant and low resonance frequency (below 250 kHz) can be used in tapping mode in SPM systems that have a low-frequency feedback loop. These cantilevers also fit SPMs that do not support probes with short lever arms.

Model: HQ:NSC16/No Al

Add to Cart

Description Specification Features Related Products

Description

MikroMasch General Purpose AFM Probes are suitable for most of the routine topography imaging experiments. Using these probes, lateral resolution down to 5 nm is attainable for scan size below 1 μm. Usually, sharpened silicon etched probes are used for general purpose measurements.

Specification

Typical radius of uncoated tip: 8 nm
Full tip cone angle: 40°
Total tip height: 12 - 18 µm
Probe material: n-type silicon
Probe bulk resistivity: 0.01 - 0.025 Ohm*cm

Related Products

Long Scanning AFM Probes, HQ:NSC16/Hard/Al BS, 190 kHz (45 N/m), MikroMasch (CAT#: STEM-M-0076-LKN)
Conductive AFM Probes, HQ:NSC16/Cr-Au, 190 kHz (45 N/m), MikroMasch (CAT#: STEM-M-0077-LKN)

Other recommended products

General Purpose AFM Probes, HQ:CSC17/No Al, 13 kHz (0.18 N/m), MikroMasch (CAT#: STEM-M-0098-LKN)
Conductive AFM Probes, HQ:CSC38/Cr-Au, 10 - 20 kHz (0.03 - 0.09 N/m), MikroMasch (CAT#: STEM-M-0133-LKN)
Highly Ordered Pyrolytic Graphite ZYH (HOPG, 3.5° Mosaic Spread), 10 x 10 x 2 mm, 1 chip, MikroMasch (CAT#: STEM-M-0161-LKN)
Highly Ordered Pyrolytic Graphite ZYA (HOPG, 0.4° Mosaic Spread), 10 x 10 x 1 mm, 1 chip, MikroMasch (CAT#: STEM-M-0156-LKN)
Highly Ordered Pyrolytic Graphite ZYH (HOPG, 3.5° Mosaic Spread), 10 x 10 x 1 mm, 5 chip, MikroMasch (CAT#: STEM-M-0162-LKN)
General Purpose AFM Probes, HQ:XSC11/No Al, 15 - 350 kHz (0.2 - 42 N/m), MikroMasch (CAT#: STEM-M-0138-LKN)
Tipless AFM Probes, HQ:CSC37/tipless/Cr-Au, 20 - 40 kHz (0.3 - 0.8 N/m), MikroMasch (CAT#: STEM-M-0130-LKN)
Tipless AFM Probes, HQ:NSC36/tipless/No Al, 65 - 130 kHz (0.6 - 2 N/m), MikroMasch (CAT#: STEM-M-0121-LKN)