MCR 702 MultiDrive Dynamic Mechanical Analyzer, with RheoCompass™ Software, Anton Paar (CAT#: STEM-LE-1532-Y)

The MCR 702 MultiDrive Dynamic Mechanical Analyzer is manufactured by Anton Paar, allowing you to perform dynamic mechanical analysis of bending, tension, compression and torsion, as well as thermodynamic analysis (TMA), standard and highly complex rheological measurements with one instrument.

Linear drive for DMA in tension, bending and compression
Maximum force: 40 N
Minimum force: 0.0005 N
Maximum displacement: 9400 µm
Minimum displacement :0.01µm
Maximum frequency: 100Hz
Minimum frequency: 0.001Hz
Maximum temperature: 600 °C
Minimum temperature: -160 °C
Maximum heating rate: 35 K/min
Maximum cooling rate: 30K/min

Two drive units for your application;
Control the greatest influence of all – temperature;
Benefit from the extensive MCR accessory portfolio for rheology;
Enjoy the convenient setup and ease of use;
One software for all demands – multifunctional and user-friendly;