Sakura Tissue-Tek VIP Series Tissue Processors, 100 specimens, Sakura (CAT#: STEM-HEPO-0057-YJL)

Sakura Tissue-Tek VIP Series Tissue Processors, 100 specimens, model VIP 1000, is manufactured by Sakura. The Sakura Tissue-Tek® VIP® Series are reliable tissue processors with a retort capacity of 100 specimens for the Tissue-Tek® VIP® 1000, 200 specimens for the Tissue-Tek® VIP® 2000, and 300 specimens for the Tissue-Tek® VIP® 3000. With a sophisticated micro-processor, the VIP® control panel permits the user to prepare and store up to 10 different processing programs at the touch a key.
The user friendly Sakura Tissue-Tek® VIP® tissue processors are not only designed for maximum reliability, but they also ensure the ultimate safety of your specimens. The computer monitors the entire process to continuously maintain all parameters under virtually any circumstances. Even in the event of power failure, the system will protect the integrity of your specimens.
Benchtop and compact, the Tissue-Tek® VIP® processors combine four key elements to produce a better block: alternating pressure, vacuum, heat, and agitation. These elements are programmable in each of 10 reagent and 4 paraffin stations. The Sakura Tissue-Tek® Series provides pre-programming of the 14 stage processing cycle, cleaning cycle, the P/V cycle and diagnostic systems. The operator may create and store up to 10 processing programs detailing time, heat, and P/V cycle at each station.

Condition: Certified Pre-Owned
Retort Capacity: 100 specimens
Dimensions/Floor Model: 1.09m (43″) high, 0.61m (24″) deep, 0.51m (20″) wide
Dimensions/Bench Model: 0.58m (23″) high, 0.61m (24″) deep, 1.02m (40″) wide
Weight: 110 kg (242 lbs.)
Voltage: 100-115 VAC, 50-60 Hz or 220-240 VAC, 50Hz
Reagent Reservoirs: Ten 3-liter reagent reservoirs, 2 cleaning reagent reservoirs and 2 fume filters
Oven Capacity: Four 3-liter interchangeable paraffin reservoirs
Operator Programming: Ten retained processing programs and a self-calculating delay timer – up to 99 days, 11 hours, 59 minutes
P/V Cycle Time: 30 seconds ambient, 90 seconds pressure, 30 seconds ambient, 90 seconds vacuum
Outputs: External warning relay

Store up to 10 different processing programs
Retort capacity of 100, 200, or 300 specimens (depending on model)
Available in bench-top or floor models
Pre-programmed cleaning cycle, P/V cycle, and diagnostic systems
Programmable 14 stage processing cycle

Leica ASP300 Tissue Processor, 68 x 59 x 132 cm, Leica (CAT#: STEM-HEPO-0053-YJL)
Sakura Tissue Tek VIP 3000 Tissue Processor, 300 specimens, Sakura (CAT#: STEM-HEPO-0054-YJL)
Sakura Tissue Tek VIP E150 Tissue Processor, 150 Cassettes, Sakura (CAT#: STEM-HEPO-0055-YJL)
Sakura Tissue-Tek VIP 5 Vacuum Infiltration Processor, 160 kg, Sakura (CAT#: STEM-HEPO-0056-YJL)