Viresolve® Process Area Modules (CAT#: AM-BP-0032-LC)

The Viresolve® Process Area Modules are stand-alone, single-use, disposable modules used to remove viruses from process-scale protein solutions. Viresolve® modules are made of a single structure, polyvinylidene fluoride (PVDF) material. The modules are thermally bonded, and no solvents are used when manufacturing the unit. These modules are used with two peristaltic pumps or other pharmaceutical-grade pumps in tangential flow filtration mode for excellent transmembrane pressure control.
The Viresolve® module effectively removes viruses while maximizing protein recovery and minimizing retention. Viresolve® 180 has excellent virus retention and consistently recovers more than 90% of proteins.

Size: L: 38.6 cm (15.2 in.), W: 19.4 cm (7.6 in.), H: 6.7 cm (2.63 in.)
Weight: 4.1kg (9.0 lb.)
Membrane Material: Polyvinylidene Fluoride (PVDF)
Module Material: PVDF
pH Range: 4 – 8
Effective Filtration Area, m2 (ft2): 0.69 m²
Pressures, bar (psig)
Typical Operating: 0.35 bar (5 psi) at 4–37 °C
Maximum Transmembrane: 0.35 bar (5 psig) at 4–37 °C
Typical Permeate Water Flow Rates, mL/min: 100 mL/min–720 mL/min
Bacterial Endotoxins: Less than 0.5 EU/mL bacterial endotoxin as tested by the LAL test
Gravimetric Extractables: The extractables level was not more than 100 mg after 24 hours in water at controlled room temperature.
Oxidizable Substances: Meet the current requirements of USP WFI oxidizable substances after a 1 L water flush per 10 stack
Toxicity: Component materials meet the current requirements of the USP Class VI Biological Test for Plastics
Sterilization: Not autoclavable or steamable