Viresolve® Standard Modules (CAT#: AM-BP-0033-LC)

Viresolve® Standard Modules are stand-alone, single-use, disposable modules used for viruses removal from protein solutions. Viresolve® modules are made of a single structure, polyvinylidene fluoride (PVDF) material. The modules are thermally bonded, and no solvents are used when manufacturing the unit.
The Viresolve® module effectively removes viruses while maintaining maximum protein recovery and minimum retention. These modules are used with two peristaltic pumps in a tangential flow filtration mode for excellent transmembrane pressure control.
Each module is equipped with a medical-grade silicone tubing kit and gasket, which enables easy connection to various of peristaltic pumps. Modules are available in multiple configurations to meet a wide range of process needs.

Size: L: 17.5 cm (6.9 in.), W: 9.3 cm (3.7 in.), H: 0.9 cm (0.35 in.)
Weight: 0.107kg (0.236 lb.)
Membrane Material: Polyvinylidene Fluoride (PVDF)
Module Material: PVDF
pH Range: 4 – 8
Effective Filtration Area, m2 (ft2): 150 cm²
Pressures, bar (psig)
Typical Permeate Water Flow Rates, mL/min: 2 mL/min–10 mL/min
Gravimetric Extractables: The extractables level was no more than 7 mg after 24 hours in water at controlled room temperature.
Oxidizable Substances: Meet the current requirements of USP WFI oxidizable substances after a 100 mL water flush
Toxicity: Component materials meet the current requirements of the USP Class VI Biological Test for Plastics
Sterilization: Water wet filter, use liquid cycle slow exhaust. Autoclavable at 121 °C for 60 min 1 time; not steamable