High Pressure Hydrogen Generator, TH-1000H7 (CAT#: STEM-GLE-0073-ZJF)

The TH-1000H7 high-pressure hydrogen generator employs SPE solid electrolyte technology to directly electrolyze pure water, eliminating alkaline corrosion. It features imported ion membranes and low-sulfur silicone rubber seals to enhance gas quality, with gas-water separation and filters made of stainless steel for high pressure resistance. The generator integrates pressure and flow control and automatic water level control, shutting down automatically in low water conditions to protect the electrolytic cell. It can reach pressures up to 70Kg/cm² (approximately 7MPa) and can be used as reaction gas.

Hydrogen Purity: 99.999%
Hydrogen Flow Rate: 0-1000ml/min
Output Pressure: 0-70Kg/cm² (Approximately 7MPa)
Pressure Stability: < 0.01MPa
Power Supply: 220V±10%, 50Hz
Power Consumption: 450W
Dimensions: 550×245×400mm
Net Weight: Approximately 28Kg

Utilizes SPE solid-state electrolyte technology.
Does not require alkali, directly electrolyzes pure water without alkaline corrosion.
Uses imported ion membranes.
Internally equipped with low-sulfur silicone rubber seals to enhance gas quality. Components such as gas-water separators and filters are made entirely of stainless steel for high pressure resistance.
Pressure and flow are controlled in an integrated manner.
Automatic water level control; automatically shuts down in case of water shortage to protect the electrolytic cell and prolong its lifespan.
Pressure can reach 70 Kg/cm2 (approximately 7 MPa), suitable for use as reaction gas.

High Pressure Hydrogen Generator, TH-1000H3
High Pressure Hydrogen Generator, TH-1000H5
High Pressure Hydrogen Generator, TH-1000H10
High Pressure Hydrogen Generator, TH-2000H7